Mumbai University BE Civil syllabus

Mumbai University · Final Year Civil Engineering · Rev-2019 'C' Scheme

Advanced Construction Technology

CEDLO7015 · Department Optional Course 3 · Semester VII · 3 credits · Internal tests 20 (average of two) + end-semester 80

End-semester paper (3 hours): Six questions of 20 marks; Q1 is compulsory and you answer four. Each module's share of the paper follows its lecture hours.

One of the Department Optional Course 3 options.

All notes for this subject
  1. Module 1: Substructure Construction

    6 hours

    Box and pipe jacking; underwater drilling, blasting and concreting; diaphragm walls; wells, caissons and cofferdams; anchoring and grouting; sheet piles; shoring deep cuts; dewatering and well points.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Box and pipe jacking
    • Underwater construction
    • Cofferdams, caissons and sheet piles
    • Dewatering and well points
  2. Module 2: Superstructure Construction

    6 hours

    Vacuum dewatering and concrete paving; slipform and continuous concreting in tall buildings; erecting tall and long-span structures; launching heavy decks; post-tensioning slabs.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Vacuum dewatering of floors
    • Construction of tall buildings
    • Launching heavy decks and long spans
  3. Module 3: Special Structures

    6 hours

    Lattice towers and transmission lines; cooling towers, silos, chimneys and domes; heavy equipment supports; space decks; erecting trusses, plate girders, chimneys and overhead tanks.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Erection of towers and transmission lines
    • Construction of cooling towers, silos and chimneys
    • Erection of trusses and girders
  4. Module 4: Advances in Construction Techniques

    8 hours

    Zero-energy, green and pre-engineered buildings; BIPV; seismic isolation and dissipation; coastal construction; 3D-printed and smart roads; stone columns, vibroflotation, grouting, micropiles, soil nailing and vertical drains.

    Examined in the 80-mark end-semester paper (about 21% of it, by lecture hours); the class tests cover what has been taught by then

    • Pre-engineered and zero-energy buildings
    • Seismic isolation and energy dissipation
    • Coastal construction techniques
    • Advanced ground improvement techniques
  5. Module 5: Dredging

    6 hours

    Dredging systems and equipment; agitation, silt, water-injection and pneumatic dredging; production cycles, capacity and economics.

    Examined in the 80-mark end-semester paper (about 15% of it, by lecture hours); the class tests cover what has been taught by then

    • Dredging systems and equipment
    • Dredging economics
  6. Module 6: Rehabilitation and Strengthening

    7 hours

    Seismic retrofitting; strengthening beams, columns, slabs and masonry walls; mud-jacking and foundation grouting; micropiling and underpinning.

    Examined in the 80-mark end-semester paper (about 18% of it, by lecture hours); the class tests cover what has been taught by then

    • Strengthening of structural members
    • Underpinning and foundation grouting

Module contents are summarised from the official Mumbai University syllabus . AiCanCode.org is not affiliated with the University of Mumbai.