KBCNMU TY Mechanical syllabus

KBCNMU · Third Year B.E. Mechanical Engineering · NEP 2020

Mechanics of Material

ME-508 · Semester V · 2 credits · ISE 40 + ESE 60

Multidisciplinary minor fixed for Mechanical students: 2 credits, still examined 40 + 60 in a 3-hour paper.

  1. Unit 1: Simple Stresses and Strains

    6 hours

    Normal and shear stress and strain, mechanical properties, Hooke's law, Poisson's ratio, volumetric strain and the relations between E, G and K.

    Examined in the 60-mark end-semester paper

    • Types of loads, stress and strain
    • Hooke's law and elastic constants
    • Relations between elastic constants
  2. Unit 2: Axial Loading and Deformation

    6 hours

    Deformation of uniform, stepped and composite bars, simple statically indeterminate bars, and an introduction to strain energy.

    Examined in the 60-mark end-semester paper

    • Bars of varying section and composite bars
    • Statically indeterminate bars
    • Strain energy under gradual, sudden and impact loads
  3. Unit 3: Compound Stresses and Strain Analysis

    6 hours

    Biaxial and triaxial stress, stresses on inclined planes, principal stresses and maximum shear stress by analysis and Mohr's circle, under combined loading.

    Examined in the 60-mark end-semester paper

    • Stresses on an oblique plane
    • Principal stresses and planes
    • Mohr's circle for plane stress
  4. Unit 4: Shear Force and Bending Moment

    6 hours

    Types of beams and loads, shear force and bending moment diagrams, and the relation between load, shear force and bending moment.

    Examined in the 60-mark end-semester paper

    • Beams, supports and types of loading
    • SFD and BMD for point loads and UDL
    • SFD and BMD for UVL, couples and combined loads
    • Relation between load, shear force and bending moment
  5. Unit 5: Torsion of Circular Shafts

    6 hours

    The torsion equation for solid and hollow shafts, shear stress and angle of twist, power transmission, and shafts under combined bending and torsion.

    Examined in the 60-mark end-semester paper

    • Torsion of circular shafts
    • Power transmission by shafts: strength and rigidity
    • Combined normal and shear stresses

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).