KBCNMU TY E&TC syllabus

KBCNMU · Third Year B.E. Electronics & Telecommunication Engineering · NEP 2020

Embedded System and RTOS

EC-606 B · Elective III · Semester VI · 3 credits · ISE 40 + ESE 60

One of the Elective III options.

  1. Unit 1: Introduction to Embedded Systems

    9 hours

    Embedded versus general computing systems, classification, characteristics and recent trends, quality attributes (design metrics) and the embedded product development life cycle.

    Examined in the 60-mark end-semester paper

    • Embedded system architecture and classification
    • Design metrics
    • Embedded software life cycle models
  2. Unit 2: Introduction to ARM Processors

    9 hours

    ARM processors and their versions — ARM7, ARM9 and ARM11 features and suitability; the Tiva TM4C123G series, its programming model and the TivaWare library.

    Examined in the 60-mark end-semester paper

    • ARM7, ARM9 and ARM11 compared
    • TM4C123G (Tiva C) microcontroller and TivaWare
  3. Unit 3: ARM7 and the LPC2148

    9 hours

    ARM7 registers, CPSR and SPSR, the ARM and RISC design philosophy, the dataflow and programmer's models and the modes of operation; the LPC2148's features, architecture, PLL and VPB divider, memory map, GPIO and timers.

    Examined in the 60-mark end-semester paper

    • ARM operating modes, registers, CPSR and SPSR
    • ARM core data flow and programmer's model
    • LPC2148 features and architecture
    • LPC2148 PLL, power control and VPB divider
    • LPC2148 memory map, GPIO and pin connect block
    • LPC2148 timers and match registers
  4. Unit 4: Real-World Interfacing with the LPC2148

    9 hours

    Assembly and Embedded C programming; interfacing LEDs, LCDs, GLCDs, keypads and stepper and DC motors; GPIO programming and generating delays with the LPC2148's timers.

    Examined in the 60-mark end-semester paper

    • LPC2148 GPIO programming: LED, keypad and GLCD
    • Embedded C basics
    • Interfacing seven-segment displays and stepper motors with the LPC2148
  5. Unit 5: Real-Time Operating Systems

    9 hours

    Types of operating system; tasks, processes and threads, multiprocessing and multitasking, task scheduling, communication and synchronisation; choosing an RTOS.

    Examined in the 60-mark end-semester paper

    • Tasks and context switching
    • Preemptive and non-preemptive kernels
    • Semaphores and mutual exclusion
    • RTOS scheduling algorithms
    • Inter-task communication

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).