KBCNMU TY Electrical syllabus

KBCNMU · Third Year B.E. Electrical Engineering · NEP 2020

Wind and Solar Power Systems

EE-608 · Semester VI · 2 credits · ISE 40 + ESE 60

The Semester VI multidisciplinary minor of the Electrical scheme: 2 credits, examined 40 + 60 with a 3-hour end-semester exam, plus 25 marks of internal continuous assessment.

  1. Unit 1: Distributed Power Generation

    6 hours

    Concept and advantages of distributed generation, its energy sources and power electronic interfaces; solar and wind energy for distributed generation.

    Examined in the 60-mark end-semester paper

    • Distributed and hybrid energy systems
    • Converters and inverters for renewables
  2. Unit 2: Solar Energy

    6 hours

    Solar radiation types, measurement and estimation, solar geometry and angles; PV principles, mono-, poly-crystalline and thin-film cells, module construction and rating, I-V characteristics and MPPT; batteries, inverters and controllers; standalone and grid-connected PV systems.

    Examined in the 60-mark end-semester paper

    • Solar radiation measurement: pyranometer and pyrheliometer
    • Solar radiation and solar angles
    • Types of solar cells and PV module manufacturing
    • Solar cell I-V and P-V characteristics
    • Maximum power point tracking
    • Solar PV system design
  3. Unit 3: Wind Energy

    6 hours

    Wind characteristics and speed measurement; horizontal- and vertical-axis turbines and their power output; rotor, gearbox, generator, yaw and pitch systems; site selection and wind farm layout; aerodynamics, power coefficient and tip-speed ratio.

    Examined in the 60-mark end-semester paper

    • Power in the wind and the Betz limit
    • Horizontal and vertical-axis wind machines
    • Components and classification of wind energy conversion systems
    • Site and turbine selection
    • Aerofoil design and aerodynamics of wind machines
  4. Unit 4: Grid Integration

    6 hours

    Synchronous and induction wind generators, pitch and stall control, wind energy conversion systems and their power electronics; grid integration of wind and solar, power quality, solar-wind hybrids, and economics.

    Examined in the 60-mark end-semester paper

    • Wind turbine control
    • Grid integration of renewable energy
    • Power quality in renewable systems
    • Hybrid renewable systems
    • Economics of renewable energy
  5. Unit 5: Energy Storage Systems

    6 hours

    Electrochemical batteries: capacity, parameters, discharge curves, ageing, models, SOC, SOH and DOD; lead-acid, nickel, lithium and graphene batteries compared; fuel cell types, electrode materials, safety and life-cycle analysis.

    Examined in the 60-mark end-semester paper

    • Battery parameters and types
    • SOC and depth of discharge
    • Fuel cells

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).