KBCNMU TY Electrical syllabus

KBCNMU · Third Year B.E. Electrical Engineering · NEP 2020

Power System-II

EE-603 · Semester VI · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Representation of Power System Components

    9 hours

    Constituents of the power system and the need for analysis; real, reactive and complex power; single-phase representation of balanced networks, one-line and impedance (reactance) diagrams, the per-unit system and models of synchronous machines and transformers.

    Examined in the 60-mark end-semester paper

    • Single-line and reactance diagrams
    • Per-unit system and change of base
  2. Unit 2: Symmetrical Fault Analysis

    9 hours

    Transients on a line; three-phase short circuit of an unloaded and a loaded synchronous machine, short-circuit current and reactances; symmetrical faults in networks, fault MVA and current with pre-fault load; circuit breaker selection and current-limiting reactors.

    Examined in the 60-mark end-semester paper

    • Short circuit of an unloaded alternator
    • Subtransient and transient reactances
    • Symmetrical fault calculation and short-circuit MVA
    • Selection of circuit breakers
    • Current-limiting reactors
  3. Unit 3: Symmetrical Components

    9 hours

    Symmetrical components of three-phase systems, the operator a and power invariance; phase shift in star-delta transformers; sequence impedances and networks of lines, machines, transformers and loads, and the sequence networks of a power system.

    Examined in the 60-mark end-semester paper

    • Symmetrical components
    • Sequence impedances and sequence networks
  4. Unit 4: Unsymmetrical Fault Analysis

    9 hours

    Shunt and series faults; LG, LL and LLG faults on an unloaded generator and on a power system; open-conductor faults.

    Examined in the 60-mark end-semester paper

    • Single line-to-ground fault
    • Line-to-line fault
    • Double line-to-ground fault
    • Open conductor faults
  5. Unit 5: Load Flow Analysis

    9 hours

    Bus classification; the bus admittance matrix by inspection and by singular transformation, the primitive network and bus incidence matrix; approximate load flow; Gauss, Gauss-Seidel and Newton-Raphson load flow.

    Examined in the 60-mark end-semester paper

    • Load flow equations and bus classification
    • Formation of the Y-bus matrix
    • Primitive network and incidence matrices
    • Gauss-Seidel load flow
    • Newton-Raphson load flow

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).