KBCNMU TY Electrical syllabus

KBCNMU · Third Year B.E. Electrical Engineering · NEP 2020

Power System-I

EE-501 · Semester V · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Power System Structure and Line Parameters I

    9 hours

    Structure of the power system and voltage levels of generation, transmission and distribution; overhead lines and underground cables; load curves and load, demand, diversity and plant factors; line resistance and skin effect; inductance of single-phase and composite-conductor lines, GMD and GMR.

    Examined in the 60-mark end-semester paper

    • Structure of a power system
    • Choice of transmission voltage
    • Load curves and load factors
    • Skin and proximity effects
    • Inductance of a single-phase line
    • GMR and GMD
  2. Unit 2: Transmission Line Parameters II

    9 hours

    Inductance of three-phase lines with symmetrical and unsymmetrical spacing, transposition, bundled conductors and the proximity effect; electric field and potential; capacitance of single-phase and three-phase lines.

    Examined in the 60-mark end-semester paper

    • Inductance of three-phase lines and transposition
    • Bundled conductors
    • Potential due to charged conductors
    • Capacitance of a single-phase line
    • Capacitance of three-phase lines
  3. Unit 3: Performance of Short Transmission Lines

    9 hours

    Classification of lines into short, medium and long; regulation and efficiency of short lines and the effect of power factor on them.

    Examined in the 60-mark end-semester paper

    • Classification of transmission lines
    • Performance of short lines
    • Efficiency and regulation of lines
  4. Unit 4: Performance of Medium Transmission Lines

    9 hours

    End-condenser, nominal-T and nominal-pi methods; the Ferranti effect, charging current and losses of an open-circuited line; effect of capacitance on a loaded line; generalised ABCD constants.

    Examined in the 60-mark end-semester paper

    • Nominal-T and nominal-pi models
    • Ferranti effect
    • ABCD constants
  5. Unit 5: Performance of Long Transmission Lines

    9 hours

    Rigorous analysis of long lines, surge impedance and surge impedance loading, interpretation of the long-line equations and the equivalent circuit; power flow through a line; methods of voltage control and compensation of lines.

    Examined in the 60-mark end-semester paper

    • Long transmission lines
    • Surge impedance loading
    • Power flow using generalised constants
    • Methods of voltage control
    • Series and shunt compensation

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).