KBCNMU · Third Year B.E. Electrical Engineering · NEP 2020
Power Electronics
EE-503 · Semester V · 3 credits · ISE 40 + ESE 60
Unit 1: Thyristors
9 hoursStatic, switching and gate characteristics of the SCR, turn-on methods and the two-transistor model; ratings and protection: snubber design, di/dt and dv/dt; series and parallel operation and string efficiency; LASCR, DIAC and TRIAC.
Examined in the 60-mark end-semester paper
- SCR characteristics and ratings
- Two-transistor analogy of the SCR
- SCR protection
- Snubber circuits
- Series and parallel operation of SCRs
- TRIAC
Unit 2: Firing, Commutation and Power Switching Devices
9 hoursFiring circuits: R, RC and UJT; natural and forced commutation, classes A to F; structure, switching and applications of the GTO, IGBT and MOSFET.
Examined in the 60-mark end-semester paper
- SCR triggering circuits
- Commutation techniques
- GTO and MCT
- Power MOSFET and IGBT
Unit 3: Controlled Rectifiers
9 hoursSingle-phase mid-point and bridge converters and semi-converters with resistive and inductive loads; three-phase fully controlled and half-controlled converters; effect of source impedance; ideal and practical dual converters with and without circulating current.
Examined in the 60-mark end-semester paper
- Single-phase fully controlled converter
- Single-phase half-controlled converter
- Three-phase fully controlled converter
- Three-phase half-controlled converter
- Effect of source inductance and overlap angle
- Dual converter
Unit 4: Choppers and Inverters
9 hoursChopper principle and control strategies, step-down and step-up choppers, classes A to E, voltage- and current-commutated thyristor choppers and multiphase choppers; half- and full-bridge voltage-source inverters, the McMurray inverter, three-phase 180-degree inverters, series and parallel inverters and PWM.
Examined in the 60-mark end-semester paper
- Chopper principle and control techniques
- Chopper classes A to E
- Single-phase full-bridge inverter
- Three-phase inverter: 120 and 180 degree modes
- Series, parallel and class E resonant inverters
- PWM techniques
Unit 5: AC Voltage Controllers and Cycloconverters
9 hoursIntegral cycle control; single-phase half- and full-wave and three-phase AC voltage controllers with resistive and inductive loads; single-phase and three-phase cycloconverters and the reduction of output harmonics.
Examined in the 60-mark end-semester paper
- Integral cycle control
- Single-phase AC voltage controller
- Cycloconverters
Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).