KBCNMU TY Electrical syllabus

KBCNMU · Third Year B.E. Electrical Engineering · NEP 2020

Microprocessor and Microcontroller

EE-606 A · Program Elective III · Semester VI · 3 credits · ISE 40 + ESE 60

One of the Program Elective III options.

All notes for this subject
  1. Unit 1: 8085 Microprocessor

    9 hours

    Organisation, architecture and pin diagram; control signals, addressing modes and instruction format; the stack and subroutines; I/O-mapped and memory-mapped I/O; the interrupt structure.

    Examined in the 60-mark end-semester paper

    • 8085 architecture and functional block diagram
    • 8085 addressing modes
    • Memory-mapped and I/O-mapped I/O
    • 8085 interrupt structure
  2. Unit 2: Assembly Language Programming

    9 hours

    Classification of instructions and the complete instruction set; programs with arithmetic, logical, conditional, branch, stack, subroutine, timer and counter operations.

    Examined in the 60-mark end-semester paper

    • 8085 instruction set
    • 8085 assembly language programs
  3. Unit 3: Interfacing Memory and Peripherals

    9 hours

    ROM, static and dynamic RAM, PROM, EPROM and EEPROM, memory organisation; interfacing 4K x 8 EPROM and RAM; I/O ports and handshake signals; the 8255 PPI and its modes.

    Examined in the 60-mark end-semester paper

    • Memory interfacing with the 8085
    • 8255 programmable peripheral interface
    • Data transfer schemes
  4. Unit 4: 8051 Microcontroller

    9 hours

    The microcontroller concept; 8051 block diagram, pins, memory organisation, PSW and flags, stack and special function registers; data transfer, arithmetic and logical instructions and programs.

    Examined in the 60-mark end-semester paper

    • Microprocessors versus microcontrollers
    • 8051 architecture
    • 8051 memory organisation
    • 8051 addressing modes and instruction set
  5. Unit 5: Interfacing and Applications

    9 hours

    Interfacing LEDs, push buttons, relays, keyboards, seven-segment and LCD displays, ADC and DAC and stepper motors; industrial applications in measurement, automation and control.

    Examined in the 60-mark end-semester paper

    • 8051 interfacing and applications
    • Keyboard and LED display interfacing
    • Microprocessor applications in measurement and control

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).