KBCNMU TY Electrical syllabus

KBCNMU · Third Year B.E. Electrical Engineering · NEP 2020

Control System

EE-601 · Semester VI · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Fundamentals of Control Systems

    9 hours

    Open- and closed-loop control and servomechanisms; transfer functions, block diagram algebra, signal flow graphs and Mason's gain formula; how negative feedback reduces parameter variation and disturbances.

    Examined in the 60-mark end-semester paper

    • Open-loop and closed-loop systems
    • Transfer function, poles and zeros
    • Block diagram reduction
    • Signal flow graphs and Mason's gain formula
    • Effect of feedback on sensitivity
  2. Unit 2: Time-Response Analysis

    9 hours

    Standard test signals; first- and second-order time responses and specifications; steady-state errors and error constants; derivative, integral and PID compensation; design for higher-order systems and performance indices.

    Examined in the 60-mark end-semester paper

    • Standard test signals
    • Response of first-order systems
    • Response of second-order systems
    • Time-domain specifications
    • Steady-state error and error coefficients
    • P, PI and PID controllers
  3. Unit 3: Control Components, Stability and Root Locus

    9 hours

    AC servomotors, synchronous and stepper motors as control components; stability and its necessary conditions, the Routh-Hurwitz criterion and its limits; root-locus concepts and construction.

    Examined in the 60-mark end-semester paper

    • AC servo motors
    • Stability and pole locations
    • Routh-Hurwitz criterion
    • Root locus construction
    • Stability from the root locus
  4. Unit 4: Frequency-Response Analysis

    9 hours

    Frequency response and its correlation with time response; polar and inverse polar plots and Bode plots; the Nyquist criterion, gain and phase margins, and constant M and N circles.

    Examined in the 60-mark end-semester paper

    • Frequency-domain specifications
    • Polar plots
    • Bode plots
    • Nyquist stability criterion
    • Gain margin and phase margin
    • Constant M and N circles
  5. Unit 5: Compensator Design and State Variables

    9 hours

    The design problem; lead, lag and lag-lead networks and compensation in the time and frequency domains; state-variable models and their conversion to and from transfer functions, diagonalisation, controllability and observability.

    Examined in the 60-mark end-semester paper

    • Lead and lag networks
    • Lag-lead compensation
    • State equations from transfer functions
    • Controllability and observability

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).