KBCNMU TY Civil syllabus

KBCNMU · Third Year B.E. Civil Engineering · NEP 2020

Transportation Engineering

CE-501 · Semester V · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Highway Planning and Geometric Design

    9 hours

    Highway development and planning in India, road classification and authorities, financing, field surveys and alignment, including hill roads; cross-section elements, camber, sight distances, design speed, superelevation, transition curves and gradients.

    Examined in the 60-mark end-semester paper

    • Road development plans in India
    • Classification of roads and road patterns
    • Highway alignment
    • Highway cross-section elements
    • Sight distance
    • Design of horizontal alignment
    • Design of vertical alignment
  2. Unit 2: Road Materials, Construction, Pavements and Traffic

    9 hours

    Aggregates, bitumen, emulsions and cutbacks and their tests, CBR and plate load tests; earth, gravel, WBM, bituminous and concrete roads; drainage; flexible pavement design (GI and CBR methods to IRC) and Westergaard's rigid pavement analysis; maintenance; and traffic characteristics, parking and accident studies and control devices.

    Examined in the 60-mark end-semester paper

    • Tests on road aggregates
    • Bituminous binders and modified bitumen
    • Subgrade soil and CBR test
    • Construction of flexible and rigid pavements
    • Highway drainage
    • Flexible pavement design to IRC 37
    • Stresses in rigid pavements
    • Traffic characteristics and studies
  3. Unit 3: Bridges

    9 hours

    Site investigation, waterway, scour depth, afflux and economic span; classification of superstructures and substructures, joints, movable and temporary bridges; erection, testing and strengthening; and bridge bearings and foundations.

    Examined in the 60-mark end-semester paper

    • Classification and components of bridges
    • Bridge site investigation and scour
    • Bridge hydrology: design flood, waterway and afflux
    • Economic span and scour depth
    • Movable and temporary bridges
    • Bridge bearings
  4. Unit 4: Docks and Harbours

    9 hours

    Classification and siting of harbours, breakwaters, quay walls, wharves, jetties, dolphins and fenders, inland water transport, tides, waves, littoral drift and coast protection, docks of all types, and navigation aids, warehouses and transit sheds.

    Examined in the 60-mark end-semester paper

    • Docks and harbours: types and planning
    • Port operations and berthing facilities
    • Breakwaters
    • Littoral drift
  5. Unit 5: Airports and Heliports

    9 hours

    Airport terms, ICAO classification and site selection, the wind rose, aircraft characteristics, runway length corrections, runway and taxiway geometrics, terminal buildings, drainage and heliports.

    Examined in the 60-mark end-semester paper

    • ICAO and FAA airport classification
    • Airport site selection
    • Airport planning and runway orientation
    • Runway length and geometric design of runways
    • Taxiways, aprons and airport drainage
    • Heliport planning

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).