KBCNMU TY Civil syllabus

KBCNMU · Third Year B.E. Civil Engineering · NEP 2020

Geotechnical Engineering

CE-503 · Semester V · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Introduction and Basic Relationships

    9 hours

    Soil and soil engineering, its history and scope, soil as a three-phase system, water content, unit weights, specific gravity, void ratio, porosity, saturation, density index and their relationships.

    Examined in the 60-mark end-semester paper

    • Soil formation, structure and clay minerals
    • Three-phase system and weight–volume relationships
  2. Unit 2: Index Properties and Classification

    9 hours

    Water content, specific gravity and particle size distribution; Atterberg limits, in-situ density, activity, sensitivity and thixotropy of clays; and the particle-size, textural, HRB, unified and IS classifications.

    Examined in the 60-mark end-semester paper

    • Index properties of soil
    • Particle size analysis: sieve and sedimentation
    • Sensitivity and thixotropy
    • Soil classification systems
  3. Unit 3: Soil Water and Permeability

    9 hours

    Adsorbed and capillary water, soil suction, shrinkage, swelling and bulking, effective and neutral stress; Darcy's law, discharge and seepage velocity, factors affecting permeability, constant- and falling-head tests.

    Examined in the 60-mark end-semester paper

    • Effective stress principle
    • Darcy's law and permeability
    • Permeability tests in the laboratory and field
  4. Unit 4: Consolidation and Compaction

    9 hours

    One-dimensional consolidation and the spring analogy, Terzaghi's theory, the laboratory test and coefficient of consolidation, secondary and three-dimensional consolidation; standard and modified Proctor tests and field compaction.

    Examined in the 60-mark end-semester paper

    • Terzaghi's one-dimensional consolidation
    • Consolidation test
    • Three-dimensional consolidation and partially saturated soils
    • Compaction and Proctor tests
    • Field compaction and its control
  5. Unit 5: Shear Strength and Earth Pressure

    9 hours

    Mohr's circle and the Mohr–Coulomb theory, direct shear, triaxial, unconfined and vane shear tests; earth pressure at rest, Rankine's active and passive pressures including cohesive soils, and Coulomb's wedge theory.

    Examined in the 60-mark end-semester paper

    • Mohr–Coulomb failure theory
    • Direct shear test
    • Triaxial test and drainage conditions
    • Unconfined compression and vane shear tests
    • Earth pressure at rest and plastic equilibrium
    • Rankine's earth pressure theory
    • Coulomb's wedge theory

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).