KBCNMU TY Civil syllabus

KBCNMU · Third Year B.E. Civil Engineering · NEP 2020

Foundation Engineering

CE-606 A · Program Elective III · Semester VI · 3 credits · ISE 40 + ESE 60

One of the Program Elective III options.

  1. Unit 1: Site Investigation and Stress Distribution

    9 hours

    Reconnaissance and exploration methods, disturbed and undisturbed sampling, penetration and sounding tests, geophysical methods; stresses from self-weight, Boussinesq's equation, loaded areas, Newmark's chart, Westergaard's analysis and contact pressure.

    Examined in the 60-mark end-semester paper

    • Planning subsurface exploration
    • Boring, sampling and samplers
    • Geophysical exploration methods
    • Boussinesq and Westergaard theories
    • Newmark's influence chart
  2. Unit 2: Bearing Capacity

    9 hours

    Minimum depth by Rankine, failure modes, Terzaghi, Hansen, Meyerhof and Vesic equations, water table and eccentricity, the IS method, plate load and penetration tests, and settlement-based safe pressure.

    Examined in the 60-mark end-semester paper

    • Terzaghi's bearing capacity theory
    • Meyerhof, Hansen, Vesic and IS methods
    • Layered soils, water table and eccentricity
    • Plate load test
    • Allowable and differential settlement
  3. Unit 3: Bulkheads, Cofferdams and Shallow Foundations

    9 hours

    Cantilever and anchored sheet-pile walls by free and fixed earth support, cofferdams; spread, combined, strap and raft footings and their settlement.

    Examined in the 60-mark end-semester paper

    • Cantilever and anchored sheet piles
    • Cofferdams
    • Proportioning of combined and strap footings
    • Raft foundations
  4. Unit 4: Pile and Well Foundations

    9 hours

    Types and driving of piles, static and dynamic capacity, load tests, group action and negative skin friction, laterally loaded and under-reamed piles; caissons and well foundations: shapes, components, depth, forces and sinking.

    Examined in the 60-mark end-semester paper

    • Classification and installation of piles
    • Static capacity of piles
    • Dynamic pile formulae
    • Pile load tests
    • Pile groups and negative skin friction
    • Under-reamed piles
    • Piers and caissons
    • Well foundations: components and sinking

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).