KBCNMU TY Civil syllabus

KBCNMU · Third Year B.E. Civil Engineering · NEP 2020

Environmental Engineering

CE-603 · Semester VI · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Water Quality, Sources and Demand

    9 hours

    Water quality and public health, contamination and treatment objectives, sources and treatment schemes, water demand and population forecasting, and physical, chemical and biological parameters to IS 10500.

    Examined in the 60-mark end-semester paper

    • Water supply schemes and design period
    • Water demand and population forecasting
    • Water quality and IS 10500
  2. Unit 2: Water Treatment

    9 hours

    The conventional treatment plant, aeration, plain sedimentation and rectangular tank design, coagulation and the jar test, clariflocculators, filtration and rapid sand filter design with backwashing, and chlorination.

    Examined in the 60-mark end-semester paper

    • Aeration
    • Sedimentation and settling tanks
    • Coagulation and flocculation
    • Rapid sand filters
    • Disinfection and chlorination
  3. Unit 3: Softening, Distribution and Sewers

    9 hours

    Hardness and softening by lime-soda, zeolite and demineralisation, defluoridation and colour removal; self-cleansing and non-scouring velocities, valves and pipe materials; manholes, sewer materials and types, and sewer design by Manning's formula.

    Examined in the 60-mark end-semester paper

    • Softening and desalination
    • Iron, manganese and fluoride removal
    • Water distribution systems
    • Design of sewers
    • Sewer construction, appurtenances and maintenance
  4. Unit 4: Wastewater Characteristics and Treatment

    9 hours

    Sources of water pollution and microorganisms, self-purification, DO, BOD and COD, MLSS and F/M, the treatment plant, preliminary and primary treatment, activated sludge and sludge digesters.

    Examined in the 60-mark end-semester paper

    • Self-purification of streams
    • Water quality parameters: BOD, COD and DO
    • Screens and grit chambers
    • Primary sedimentation tanks
    • Activated sludge process
  5. Unit 5: Biological Treatment and Sanitation

    9 hours

    Trickling filters, aerobic and anaerobic treatment, oxidation ponds and ditches, sludge disposal, septic tank design, low-cost toilets, and anaerobic digestion.

    Examined in the 60-mark end-semester paper

    • Trickling filters
    • Oxidation ponds and sludge disposal
    • Septic tanks and interceptors
    • UASB reactors and membrane bioreactors

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).