KBCNMU SY E&TC syllabus

KBCNMU · Second Year B.E. Electronics & Telecommunication Engineering · NEP 2020

Digital System Design

EC-303 · Semester III · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Logic Simplification and Code Converters

    9 hours

    Boolean algebra and De Morgan's theorems, SOP, POS and canonical forms, Karnaugh maps up to five variables with don't-cares; binary, BCD, ASCII and Hamming codes, and binary-to-Gray, Gray-to-binary, BCD-to-Excess-3 and BCD-to-seven-segment converters.

    Examined in the 60-mark end-semester paper

    • Boolean algebra and universal gates
    • SOP and POS forms of logic functions
    • K-map minimisation with don't-care conditions
    • Number systems and codes
    • Code converters
  2. Unit 2: Combinational Logic Circuits

    9 hours

    Half and full adders and subtractors from basic gates, the BCD adder and IC 7483, 1-bit and 2-bit comparators, multiplexers, demultiplexers and decoders.

    Examined in the 60-mark end-semester paper

    • Adders, subtractors and the look-ahead carry generator
    • BCD adder
    • Magnitude comparator
    • Multiplexers and multiplexer trees
    • Demultiplexers and decoders
  3. Unit 3: Sequential Logic Circuits

    9 hours

    How sequential circuits differ from combinational ones; SR, JK, master-slave JK, T and D flip-flops; SISO, SIPO, PIPO, PISO, bidirectional and universal shift registers and the ring counter.

    Examined in the 60-mark end-semester paper

    • Latches and the SR flip-flop
    • JK, master–slave JK, D and T flip-flops
    • Registers and shift registers
    • Ring and twisted-ring counters, sequence generators
  4. Unit 4: Counters and Sequential Circuits

    9 hours

    Design of asynchronous (ripple) and mod-N ripple counters, synchronous and mod-N synchronous counters and up-down counters; the Mealy and Moore models of a synchronous sequential circuit with block diagrams, state diagrams, state tables and state assignment.

    Examined in the 60-mark end-semester paper

    • Ripple and mod-n counters
    • Synchronous and up/down counters
    • Moore and Mealy machines
    • State diagrams, state tables and state reduction
    • State assignment and FSM implementation
  5. Unit 5: Logic Families

    9 hours

    Classification and specifications of logic families — propagation delay, noise margin, fan-in and fan-out; TTL gates and the TTL family, the ECL family, CMOS inverter, NOR and NAND gates, TTL-CMOS interfacing, and an introduction to programmable logic devices.

    Examined in the 60-mark end-semester paper

    • Characteristics of digital ICs
    • TTL NAND gate
    • RTL, DTL and ECL
    • CMOS gates and CMOS versus TTL
    • Interfacing CMOS and TTL
    • PROM, PAL and PLA

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).