KBCNMU SY E&TC syllabus

KBCNMU · Second Year B.E. Electronics & Telecommunication Engineering · NEP 2020

Analog and Digital Communication

EC-403 · Semester IV · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Introduction to Communication Systems

    9 hours

    The basic communication system and RF band segments, the need for and types of modulation (AM, FM, PM), PAM, PWM and PPM; classes and types of noise, Gaussian and white noise, signal-to-noise ratio, noise figure, and pre-emphasis and de-emphasis.

    Examined in the 60-mark end-semester paper

    • Elements and types of communication systems
    • Need for modulation and amplitude modulation
    • PAM, PWM and PPM
    • Sources and types of noise
    • Noise calculations and noise figure
    • Pre-emphasis and de-emphasis
  2. Unit 2: Amplitude and Frequency Modulation

    9 hours

    The AM wave in time and frequency, AM transmitters and receivers, DSB and SSB; FM and PM and the modulation index, comparing AM, FM and PM; receiver sensitivity, selectivity and fidelity; TRF and superheterodyne receivers.

    Examined in the 60-mark end-semester paper

    • AM spectrum, modulation index and power
    • DSB-SC modulation
    • SSB and VSB modulation
    • Frequency modulation and modulation index
    • Phase modulation and its relation to FM
    • Receiver characteristics: sensitivity, selectivity, fidelity and image rejection
    • TRF and superheterodyne receivers
  3. Unit 3: Waveform Coding and Baseband Shaping

    9 hours

    PCM and its quantisation noise, delta and adaptive delta modulation, time-division multiplexing and the T1 multiplexer; discrete PAM signals and their power spectra, ISI and Nyquist's criterion for distortionless transmission, and the eye pattern.

    Examined in the 60-mark end-semester paper

    • Pulse code modulation
    • Quantisation and companding
    • Delta and adaptive delta modulation
    • TDM and FDM
    • Digital multiplexing hierarchies
    • Inter-symbol interference
  4. Unit 4: Information and Detection Theory

    9 hours

    Uncertainty, information and entropy, source coding and Huffman coding; discrete memoryless channels, mutual information, channel capacity and the channel coding theorem.

    Examined in the 60-mark end-semester paper

    • Entropy and information
    • Huffman and Shannon–Fano coding
    • Discrete memoryless channels and mutual information
    • Channel capacity and the channel coding theorem
  5. Unit 5: Digital Modulation Techniques

    9 hours

    PSK, FSK, QPSK, DPSK and MSK, and how FSK, PSK, QPSK and MSK compare.

    Examined in the 60-mark end-semester paper

    • BASK, BFSK and BPSK
    • QPSK, OQPSK and M-ary PSK
    • QASK and MSK
    • Error probability of digital modulations

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).