KBCNMU SY Electrical syllabus

KBCNMU · Second Year B.E. Electrical Engineering · NEP 2020

Electrical Machines-II

EE-401 · Semester IV · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Three-Phase Synchronous Alternator I

    9 hours

    Construction and rotor types of the alternator, excitation systems and armature windings; winding factors and the EMF equation; the alternator on load, armature reaction and synchronous impedance; regulation by direct loading, the synchronous impedance (EMF) and MMF methods.

    Examined in the 60-mark end-semester paper

    • Construction of synchronous machines
    • EMF equation and winding factors
    • Armature reaction
    • Synchronous reactance and phasor diagram
    • EMF and MMF methods of regulation
  2. Unit 2: Three-Phase Synchronous Alternator II

    9 hours

    Two-reaction theory of salient-pole machines, direct- and quadrature-axis reactances; the power-angle characteristic; parallel operation: need, conditions and method; effect of mechanical torque and excitation on parallel alternators, load sharing and the alternator on an infinite bus.

    Examined in the 60-mark end-semester paper

    • Two-reaction theory and the slip test
    • Power-angle relation
    • Parallel operation of alternators
    • Synchronising an alternator
    • Alternator on an infinite bus
  3. Unit 3: Induction Motor I

    9 hours

    Construction, working and types of three-phase induction motors; torque development and the torque-slip characteristic, the condition for maximum torque; high-torque and double-cage motors; power flow, losses, efficiency and the equivalent circuit; no-load and blocked-rotor tests and the circle diagram.

    Examined in the 60-mark end-semester paper

    • Construction and rotating magnetic field of induction motors
    • Torque equations and torque-slip characteristics
    • Double-cage and deep-bar induction motors
    • Losses, efficiency and maximum output
    • Equivalent circuit and phasor diagram of induction motors
    • No-load and blocked-rotor tests
    • Circle diagram
  4. Unit 4: Induction Motor II and Single-Phase Motors

    9 hours

    Starters for three-phase induction motors, speed control, cogging and magnetic locking, effect of supply voltage and frequency, harmonics and crawling; classification, construction and characteristics of split-phase, shaded-pole and capacitor-start single-phase motors; the AC series motor.

    Examined in the 60-mark end-semester paper

    • Starters for three-phase induction motors
    • Speed control of induction motors
    • Cogging and crawling
    • Double revolving field theory
    • Starting methods and types of single-phase motors
    • AC series motors
  5. Unit 5: Three-Phase Synchronous Motor

    9 hours

    Working and main features of the synchronous motor, torque, equivalent circuit and power flow; effect of excitation at constant load and of load at constant excitation; starting, hunting and applications.

    Examined in the 60-mark end-semester paper

    • Torque angle and equivalent circuit
    • V curves and inverted V curves
    • Starting of synchronous motors
    • Hunting
    • Synchronous versus induction motors

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).