KBCNMU SY Electrical syllabus

KBCNMU · Second Year B.E. Electrical Engineering · NEP 2020

Electrical Machines-I

EE-303 · Semester III · 3 credits · ISE 40 + ESE 60

Unit III also includes the field test on DC series motors.

  1. Unit 1: DC Generator

    9 hours

    Construction of the DC machine, EMF induced in an armature coil, lap and wave windings; excitation and classification of DC generators, voltage build-up, critical field resistance and critical speed; armature reaction, commutation and generator characteristics.

    Examined in the 60-mark end-semester paper

    • Construction and EMF equation of DC generators
    • Lap and wave armature windings
    • Types of DC machines by excitation
    • Open-circuit characteristic of a DC generator
    • Armature reaction and commutation
  2. Unit 2: DC Motor

    9 hours

    Principle and working, back EMF, classification and torque equation of DC motors; speed-armature current and speed-torque characteristics; power stages, losses and efficiency; the permanent-magnet DC motor.

    Examined in the 60-mark end-semester paper

    • Back EMF and torque equation of DC motors
    • Characteristics of DC shunt and series motors
    • Losses and efficiency of DC machines
    • PMDC and DC servo motors
  3. Unit 3: DC Motor Control and Testing

    9 hours

    Modern starters, speed control methods, reversal of rotation and electric braking; direct load test, Swinburne's and Hopkinson's tests and the field test on DC series motors.

    Examined in the 60-mark end-semester paper

    • DC motor starters
    • Speed control of DC motors
    • Braking of DC motors
    • Brake test on a DC motor
    • Swinburne's and Hopkinson's tests
  4. Unit 4: Single-Phase Transformer

    9 hours

    Construction and principle, phasor diagram and equivalent circuit; voltage regulation, losses, efficiency and the condition for maximum efficiency; effect of frequency; open-circuit and short-circuit tests.

    Examined in the 60-mark end-semester paper

    • Ideal transformer
    • Phasor diagrams of a transformer
    • Equivalent circuit of a transformer
    • Voltage regulation of a transformer
    • Efficiency and all-day efficiency
    • Open-circuit and short-circuit tests on transformers
  5. Unit 5: Three-Phase Transformer

    9 hours

    Construction, types of connection and their features, vector groups; parallel operation; harmonics in the magnetising current; tap changers; the Scott connection; all-day efficiency of distribution transformers.

    Examined in the 60-mark end-semester paper

    • Three-phase transformer connections
    • Vector groups
    • Parallel operation and load sharing
    • Harmonics and the oscillating neutral
    • On-load tap changers
    • Scott and V-V connections

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).