KBCNMU · Second Year B.E. Electrical Engineering · NEP 2020
Electrical Circuit Analysis
EE-301 · Semester III · 3 credits · ISE 40 + ESE 60
Unit 1: Magnetic Coupling and Resonance
9 hoursSelf and mutual inductance, the coefficient of coupling and the dot convention; multi-winding, single-tuned and double-tuned coupled circuits; series and parallel resonance, frequency response, Q factor and bandwidth; network topology and duality.
Examined in the 60-mark end-semester paper
- Magnetically coupled circuits
- Dot convention for coupled circuits
- Single- and double-tuned circuits
- Series resonance
- Parallel resonance, bandwidth and Q factor
- Duality
Unit 2: Network Theorems
9 hoursSuperposition, Thevenin's, Norton's, maximum power transfer, reciprocity and compensation theorems, applied to circuits with dependent current and voltage sources.
Examined in the 60-mark end-semester paper
- Independent and dependent sources
- Superposition theorem
- Thevenin's and Norton's theorems
- Maximum power transfer theorem
- Reciprocity and Millman's theorems
- Compensation theorem
Unit 3: Solution of First- and Second-Order Networks
9 hoursFirst- and second-order differential equations of series and parallel RL, RC and RLC circuits; initial and final conditions; forced and free response, time constants, transient and steady-state response.
Examined in the 60-mark end-semester paper
- Initial and final conditions
- Time constants of RL and RC circuits
- Transient response of RL and RC circuits
- Transient response of RLC circuits
Unit 4: Circuit Analysis Using Laplace Transforms
9 hoursLaplace transforms of standard inputs and circuit elements, the convolution integral and inverse transforms, transformed networks with initial conditions; Fourier series and transforms of standard signals.
Examined in the 60-mark end-semester paper
- Laplace transforms of circuit elements
- Transformed networks with initial conditions
- Response to step, ramp and exponential inputs
- Solving RLC circuits with Laplace transforms
- Trigonometric and exponential Fourier series
Unit 5: Two-Port Networks and Network Functions
9 hoursTerminal pairs and two-port variables; impedance, admittance, transmission and hybrid parameters and the relations between them; interconnection of two-ports; poles and zeros of network functions.
Examined in the 60-mark end-semester paper
- Z, Y and transmission parameters
- Hybrid parameters of two-port networks
- Relationships between two-port parameters
- Interconnection of two-port networks
- Network functions of one-port and two-port networks
- Poles and zeros of network functions
Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).