KBCNMU SY Civil syllabus

KBCNMU · Second Year B.E. Civil Engineering · NEP 2020

Surveying and Geomatics

CE-303 · Semester III · 3 credits · ISE 40 + ESE 60

  1. Unit 1: Introduction to Surveying

    9 hours

    Principles and divisions of surveying, linear measurement with chain and tape and errors from incorrect length, setting right angles, the prismatic compass, bearings and local attraction.

    Examined in the 60-mark end-semester paper

    • Principles and classification of surveying
    • Chain surveying: stations, lines and offsets
    • Tape corrections: length, slope, temperature, pull and sag
    • Compass traversing and bearings
    • Local attraction and magnetic declination
  2. Unit 2: Levelling and Contouring

    9 hours

    Levelling terms and methods, the dumpy level and its temporary adjustments, booking by height of instrument and rise and fall, differential, profile, cross-section and reciprocal levelling; contours and their uses.

    Examined in the 60-mark end-semester paper

    • Levels and levelling terms
    • Types of levelling
    • Reduced levels: collimation and rise-and-fall methods
    • Curvature, refraction and reciprocal levelling
    • Contours and contouring
  3. Unit 3: Theodolite

    9 hours

    Parts and temporary adjustment of the transit theodolite and its fundamental axes, horizontal angles by repetition and reiteration, vertical angles, traverse coordinates, balancing by Bowditch's and transit rules, Gale's table and electronic theodolites.

    Examined in the 60-mark end-semester paper

    • Theodolite and its adjustments
    • Measuring horizontal and vertical angles
    • Latitudes and departures
    • Balancing a traverse
  4. Unit 4: Tacheometry and Plane Table Survey

    9 hours

    The stadia principle and the fixed-hair method with a vertical staff; plane table accessories, orientation, setting up and methods of plane tabling.

    Examined in the 60-mark end-semester paper

    • Stadia tacheometry
    • Tacheometric constants
    • Plane table surveying
  5. Unit 5: Trigonometric Levelling, Photogrammetry and Total Station

    9 hours

    Heights of objects with accessible and inaccessible bases; terrestrial and aerial photogrammetry, photo scale and overlaps; and measuring angles and distances with a total station.

    Examined in the 60-mark end-semester paper

    • Heights and distances by trigonometric levelling
    • Terrestrial photogrammetry and the photo-theodolite
    • Aerial photographs: scale, relief displacement and flying height
    • Total station surveying

Unit contents are summarised from the official KBCNMU syllabus . AiCanCode.org is not affiliated with Kavayitri Bahinabai Chaudhari North Maharashtra University (KBCNMU).