GUG TY Mechanical syllabus

GUG · Third Year B.Tech. Mechanical Engineering · NEP 2020

Rapid Prototyping and Additive Manufacturing

STPECMEC605C · Program Elective II · Semester VI · 3 credits · IE 10 + mid-semester 10 + ESE 80

One of the Program Elective II options.

  1. Unit 1: Introduction to Rapid Prototyping and AM

    9 hours

    The product development cycle, concurrent and reverse engineering; the need for rapid prototyping; conventional versus additive manufacturing, its advantages, limits and uses; ASTM classification of AM processes; rapid tooling and AM in Industry 4.0 and digital manufacturing.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Concurrent engineering
    • Digitisation and model reconstruction for AM
    • Additive versus conventional manufacturing
    • Classification of AM processes
    • Rapid tooling and investment-casting patterns
  2. Unit 2: CAD Modelling and Process Planning

    9 hours

    Geometric modelling and CAD requirements for AM; the STL format, its generation, defects and repair; slicing, support structures, build orientation, layer thickness, process planning and build time; AM software.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • The AM process chain
    • Slicing software and STL files
    • Part orientation, supports and hollowing in AM design
  3. Unit 3: Additive Manufacturing Processes

    9 hours

    Principles, parameters, materials and uses of SLA, FDM, SLS, LOM, SLM, EBM, binder jetting and directed energy deposition, compared.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stereolithography and DLP
    • Fused deposition modelling
    • Selective laser sintering and melting
    • Laminated object manufacturing
    • Electron beam melting
    • Binder jetting
    • Directed energy deposition
  4. Unit 4: Materials and Applications

    9 hours

    Polymers, metals, ceramics and composites for AM, their properties and selection; direct and indirect rapid tooling; applications in aerospace, automobiles, biomedicine, tooling, consumer products and customised manufacturing; case studies.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Materials for additive manufacturing
    • Industrial applications of AM
    • Medical applications and bioprinting
  5. Unit 5: Design Considerations and Emerging Trends

    9 hours

    Design guidelines for AM, topology optimisation, lattices and part consolidation; post-processing, quality control and inspection; economics and sustainability; hybrid manufacturing, 4D printing, bioprinting and the future of AM.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Design for additive manufacturing
    • Post-processing in AM
    • 4D printing
    • Future directions of AM

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.