GUG TY Mechanical syllabus

GUG · Third Year B.Tech. Mechanical Engineering · NEP 2020

Finite Element Methods

STPECMEC606C · Program Elective III · Semester VI · 3 credits · IE 10 + mid-semester 10 + ESE 80

One of the Program Elective III options.

All notes for this subject
  1. Unit 1: Elasticity, Variational Principles and Bar Elements

    9 hours

    Stress and strain components and relations, elastic constants, plane stress and strain, equilibrium and compatibility, boundary conditions, Saint-Venant's principle and Airy's stress function; history and scope of FEM; virtual work, minimum potential energy and the Rayleigh-Ritz method; 1-D bar elements: stiffness matrix, assembly, boundary conditions, load vector and temperature effects.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stress, strain and equilibrium relations
    • Plane stress and plane strain
    • Finite element terminology and steps
    • Potential energy and equilibrium
    • Rayleigh–Ritz method for bar elements
    • Bar and spring element stiffness matrices
    • Assembly of the global stiffness matrix
    • Boundary conditions: elimination and penalty approaches
    • Thermal loads in 1D finite elements
  2. Unit 2: Discretisation and Axisymmetric Analysis

    9 hours

    Discretising a continuum, degrees of freedom and bandwidth; 2-D and 3-D element types, displacement models and convergence; axisymmetric solids under axisymmetric load with CST ring elements.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Shape functions and their properties
    • Three-dimensional elements: tetrahedra and bricks
    • Axisymmetric finite elements
  3. Unit 3: Two-Dimensional Elements and Trusses

    9 hours

    CST and LST elements: stiffness, assembly, boundary conditions, load vector, stresses and temperature effects; plane trusses in local and global coordinates, member forces and stresses.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Constant strain triangle
    • Global, local and natural coordinates
    • Truss and plane frame elements
  4. Unit 4: Beams, Isoparametric Elements and Numerical Methods

    9 hours

    Beam element stiffness and load vectors; sub-, iso- and superparametric and higher-order elements; Gauss quadrature; torsion of prismatic bars with triangular elements; matrix algebra, eigenvalues and Gauss elimination for FEM.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Beam element stiffness matrix
    • Isoparametric formulation
    • Higher-order elements: p- and h-refinement
    • Numerical integration: Gauss quadrature
    • Torsion of non-circular shafts by FEA
    • Matrix operations for FEA
    • Gaussian elimination
  5. Unit 5: Dynamic and Thermal Analysis, Programming and Software

    9 hours

    Mass matrices and free vibration of bar elements; steady 1-D and 2-D conduction with bar and triangular elements; programming FEM from reading the model to solving for displacements, strains and stresses; pre- and post-processing and commercial FEA packages.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Lumped and consistent mass matrices
    • Free vibration and the eigenvalue problem
    • 1D steady-state conduction elements
    • Meshing, model validity and FEA software

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.