GUG TY Mechanical syllabus

GUG · Third Year B.Tech. Mechanical Engineering · NEP 2020

Computer Aided Design

STPECMEC506C · Program Elective I · Semester V · 3 credits · IE 10 + mid-semester 10 + ESE 80

One of the Program Elective I options.

  1. Unit 1: CAD Systems and Rasterisation

    9 hours

    CAD and its software modules (operating system, graphics, applications, programming, communication); rasterisation, the frame buffer and N-bit plane buffers, simple colour frame buffers; DDA and Bresenham's algorithms for lines, circles and ellipses.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • CAD tools and graphics standards
    • Frame buffer, resolution and aspect ratio
    • Line drawing: DDA and Bresenham's algorithms
    • Circle drawing: DDA, Bresenham and midpoint algorithms
  2. Unit 2: Transformations, Curves and Clipping

    9 hours

    2D geometric and coordinate transformations: scaling, translation, rotation, reflection and shear; homogeneous coordinates, concatenated and inverse transformations; 3D transformations and reflection about an arbitrary line; Bezier curves; windowing and clipping algorithms.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • 2D transformations
    • 3D transformations
    • Hermite, Bezier, B-spline and NURBS curves
    • Windowing and the viewing transformation
    • Line and polygon clipping
  3. Unit 3: Fundamentals of the Finite Element Method

    9 hours

    Plane stress and strain, compatibility, the principle of minimum potential energy, displacement and shape functions for linear and quadratic bar elements, stiffness and force matrices.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Plane stress and plane strain
    • Potential energy and equilibrium
    • Shape functions and their properties
    • Bar and spring element stiffness matrices
    • Assembly of the global stiffness matrix
  4. Unit 4: Trusses and the Constant Strain Triangle

    9 hours

    Truss problems with linear shape functions; shape functions of the CST and two-dimensional problems with constant strain triangles.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Truss and plane frame elements
    • Constant strain triangle
  5. Unit 5: Optimum Design

    9 hours

    Adequate and optimum design; Johnson's method: primary and subsidiary design equations and limit equations; optimum design with normal specifications of a tension bar, transmission shaft, pressure vessel and helical spring; redundant specifications.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Optimum design

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.