GUG · Third Year B.Tech. Electrical Engineering · NEP 2020
Electrical Machine-II
STPCCELE503 · Semester V · 3 credits · IE 10 + mid-semester 10 + ESE 80
Unit 1: Induction Motor
9 hoursConstruction and principle of three-phase induction motors; torque-slip characteristics; DOL, star-delta, autotransformer and rotor-resistance starting; regenerative, plugging and dynamic braking; speed control by pole changing, frequency, rotor resistance and supply voltage. Single-phase induction motors: double revolving field theory, equivalent circuit, split-phase and shaded-pole motors; no-load and blocked-rotor tests.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Construction and rotating magnetic field of induction motors
- Torque equations and torque-slip characteristics
- Starters for three-phase induction motors
- Braking of induction motors
- Speed control of induction motors
- Double revolving field theory
- Equivalent circuit of a single-phase induction motor
- Starting methods and types of single-phase motors
- No-load and blocked-rotor tests
Unit 2: Synchronous Machines: Construction and EMF
9 hoursSalient and cylindrical rotor construction; armature and field windings; operation as generator and motor; the EMF equation, distribution and pitch factors and harmonics in the induced EMF; torque equation and starting of the synchronous motor.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Construction of synchronous machines
- EMF equation and winding factors
- Harmonics in the induced EMF of alternators
- Torque angle and equivalent circuit
- Starting of synchronous motors
Unit 3: Synchronous Machine Analysis
9 hoursCylindrical-rotor machines: phasor diagrams and equivalent circuits of motor and generator, armature reaction, OC and SC tests, SCR, regulation by the synchronous impedance and Potier methods, the synchronous condenser. Salient-pole machines: two-reaction theory, phasor diagrams, the slip test and Xd and Xq.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Synchronous reactance and phasor diagram
- Armature reaction
- Open-circuit and short-circuit tests
- Short-circuit ratio
- EMF and MMF methods of regulation
- Potier triangle method
- Synchronous condensers and static VAR systems
- Two-reaction theory and the slip test
Unit 4: Power Flow and Parallel Operation
9 hoursPower flow equations and power-angle characteristics of cylindrical and salient-pole machines; losses and efficiency; V and inverted V curves; hunting and damper windings; parallel operation of alternators and load sharing.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Power-angle relation
- Losses and efficiency of synchronous machines
- V curves and inverted V curves
- Hunting
- Parallel operation of alternators
- Alternator on an infinite bus
Unit 5: Transients and Special Motors
9 hoursSudden three-phase short circuit; transient and subtransient reactances, their measurement and time constants; sequence reactances. Special motors in outline: Schrage, universal, AC series, reluctance, repulsion and hysteresis motors.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Short circuit of an unloaded alternator
- Subtransient and transient reactances
- Sequence impedances and sequence networks
- AC series motors
- Schrage, universal, reluctance and repulsion motors
- Hysteresis motors
Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.