GUG TY Electrical syllabus

GUG · Third Year B.Tech. Electrical Engineering · NEP 2020

Electrical Drives

STPECELE605A · Program Elective II · Semester VI · 3 credits · IE 10 + mid-semester 10 + ESE 80

One of the Program Elective II options.

All notes for this subject
  1. Unit 1: Electric Drives

    9 hours

    Advantages and choice of electric drives and their losses; trends in DC and AC drives; drive dynamics and equivalent parameters; load torque components and classes; steady-state stability; speed-torque characteristics; load equalisation.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Electric drive components
    • Dynamics of electric drives and torque equations
    • Equivalent drive parameters and moment of inertia
    • Load torque and steady-state stability
    • Load equalisation
  2. Unit 2: DC Motor Drives

    9 hours

    Starting, braking and speed control of DC motors with single-phase fully and half-controlled rectifiers; three-phase converter-fed DC drives; chopper-controlled DC drives.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Converter-fed DC drives
    • Dual converter-fed DC drives
    • Chopper-fed DC drives
    • Braking of DC drives
  3. Unit 3: Induction Motor Drives

    9 hours

    AC voltage-controlled drives; VSI-fed drives, stator-side scalar and vector control; rotor-side control and slip power recovery; CSI drives; regeneration: dynamic and regenerative braking, DC injection and plugging.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stator voltage and V/f control
    • VSI and CSI fed induction motor drives
    • Vector control of induction motors
    • Slip power recovery and rotor resistance control
    • Braking of induction motors
  4. Unit 4: Estimation of Motor Ratings

    9 hours

    Thermal models of motors; duty cycles; motor rating for duty cycles; overload factor for short-time and intermittent duty; load diagrams.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Thermal model of a motor
    • Motor duty classes and enclosures
    • Motor rating for fluctuating and intermittent loads
  5. Unit 5: Synchronous Motor Drives

    9 hours

    Steady-state and dynamic stability limits; true and self-synchronous modes; variable-frequency control of multiple motors; self-controlled drives with load-commutated inverters and with cycloconverters; starting large synchronous machines.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Synchronous motor variable-speed drives
    • Load-commutated inverter-fed synchronous motor drives
    • Self-controlled synchronous motor drives with cycloconverters

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.