GUG TY Electrical syllabus

GUG · Third Year B.Tech. Electrical Engineering · NEP 2020

Digital Electronics Circuits

STPECELE506B · Program Elective I · Semester V · 3 credits · IE 10 + mid-semester 10 + ESE 80

One of the Program Elective I options.

  1. Unit 1: Fundamentals of Digital Systems and Logic Families

    9 hours

    Digital signals and circuits; AND, OR, NOT, NAND, NOR and XOR; Boolean algebra and IC gates; binary, signed binary, octal and hexadecimal numbers; binary arithmetic with 1's and 2's complements.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Number systems and codes
    • Boolean algebra
    • Binary arithmetic with 1's and 2's complement
  2. Unit 2: Combinational Circuits I

    9 hours

    Standard forms of logic functions; K-map simplification and don't-care conditions; multiplexers and demultiplexers.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • SOP and POS reduction
    • Karnaugh maps
    • Multiplexers and demultiplexers
  3. Unit 3: Combinational Circuits II

    9 hours

    Adders and subtractors, the carry look-ahead adder; comparators, parity checkers and generators; code converters, priority encoders, display decoders and drivers; Quine-McCluskey minimisation.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Half and full adders
    • Code converters and comparators
    • Encoders and decoders
    • Quine-McCluskey minimisation
  4. Unit 4: Sequential Circuits

    9 hours

    SR, JK, T and D flip-flops and their conversion; shift registers; ring counters; ripple and synchronous counters.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Latches and flip-flops
    • Shift registers
    • Ring and twisted-ring counters
    • Asynchronous counters
    • Synchronous counter design
  5. Unit 5: Semiconductor Memories and Programmable Logic Devices

    9 hours

    Memory organisation and expansion; classes of memory, sequential memory, ROM and RAM types; PLA, PAL and FPGA.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Semiconductor memories: RAM, ROM and flash
    • PLA and PAL

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.