GUG · Third Year B.Tech. Electrical Engineering · NEP 2020
Control System
STPCCELE602 · Semester VI · 3 credits · IE 10 + mid-semester 10 + ESE 80
Unit 1: Mathematical Modelling of Physical Systems
9 hoursState-variable and transfer-function models of electrical, mechanical and other systems and the analogies between them; linearisation; transfer functions and impulse and frequency responses; block diagrams and signal flow graphs.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Modelling electrical and mechanical systems
- Electrical-mechanical analogies
- Transfer function, poles and zeros
- Block diagram reduction
- Signal flow graphs and Mason's gain formula
Unit 2: Characterisation of Systems
9 hoursSystem types; time response of first- and second-order systems; steady-state errors; dominant poles and zeros; frequency response of LTI systems, peaking frequency and bandwidth; time- and frequency-domain indices.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Response of first-order systems
- Response of second-order systems
- Time-domain specifications
- Steady-state error and error coefficients
- Frequency-domain specifications
Unit 3: Stability Analysis of Closed-Loop Systems
9 hoursAbsolute and relative stability; the Routh-Hurwitz criterion, root locus, Bode and Nyquist plots.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Stability and pole locations
- Routh-Hurwitz criterion
- Root locus construction
- Bode plots
- Nyquist stability criterion
- Gain margin and phase margin
Unit 4: State-Space Modelling and State Feedback Control
9 hoursState-space models; controllability and observability; state feedback and observer design.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- State variables and state-space representation
- State equations from transfer functions
- Controllability and observability
- Pole placement and Ackermann's formula
- Full-order state observer
Unit 5: Compensator Design
9 hoursThe need for compensation; lag, lead and lag-lead networks and their transfer functions; compensator design in time and frequency domains with root locus and Bode plots; active and passive realisation; PID controller design.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Lead and lag networks
- Lag-lead compensation
- Root locus design of lead and lag compensators
- P, PI and PID controllers
- Ziegler-Nichols tuning
Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.