GUG TY Civil syllabus

GUG · Third Year B.Tech. Civil Engineering · NEP 2020

Water Supply Engineering

STPCCCEC505 · Semester V · 3 credits · IE 10 + mid-semester 10 + ESE 80

The scheme gives it 3 credits and the full 10 + 10 + 80 theory exam; the course page of the scanned syllabus prints 30 + 20 = 50, which looks like a misprint.

  1. Unit 1: Water Demand and Sources

    9 hours

    The need for water supply schemes; types of demand, per-capita demand and its variation, design period and population forecasting; rain, ground and surface water sources; intake structures.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Water supply schemes and design period
    • Water demand and population forecasting
    • Intake structures
  2. Unit 2: Conveyance and Distribution

    10 hours

    Pipes, joints and fittings; head loss by Manning's, Darcy-Weisbach and Hazen-Williams formulae; rising mains and the selection of pumps; requirements, methods and layouts of distribution systems, appurtenances, leakage and leak detection.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Turbulent flow and Darcy–Weisbach equation
    • Centrifugal pumps
    • Water distribution systems
    • Storage reservoir capacity
  3. Unit 3: Water Quality

    8 hours

    Water quality standards and water-borne diseases; physical (colour, taste, odour, temperature, turbidity), chemical (solids, chlorides, hardness, pH, metals, nitrogen, dissolved gases) and bacteriological characteristics; drinking-water standards.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Water quality and IS 10500
    • Water quality parameters: BOD, COD and DO
    • Toxic metals and pesticides in water
  4. Unit 4: Water Treatment: Aeration, Coagulation and Sedimentation

    9 hours

    Objects of treatment, unit operations and processes and the flow sheet of a conventional plant; aerators; coagulation and flocculation, coagulants and doses, mixing and flocculation devices; settling basins, inlets and outlets and clariflocculators.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Aeration
    • Coagulation and flocculation
    • Design of flash mixers and flocculators
    • Sedimentation and settling tanks
  5. Unit 5: Filtration and Disinfection

    9 hours

    The mechanism of filtration, rapid and slow sand and pressure filters, filter elements, filter sand (effective size, uniformity coefficient) and operating problems; disinfection, its mechanism and criteria, disinfectants and chlorination.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Rapid sand filters
    • Slow sand and pressure filters
    • Disinfection and chlorination

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.