GUG TY Civil syllabus

GUG · Third Year B.Tech. Civil Engineering · NEP 2020

Transportation Engineering-I

STPECCEC506A · Elective I · Semester V · 3 credits · IE 10 + mid-semester 10 + ESE 80

One of the Elective I options.

  1. Unit 1: Development and Planning; Traffic Engineering

    7 hours

    Road transport characteristics, classification of roads, development plans and network patterns, surveys and principles of alignment; traffic characteristics and surveys, intersections, urban traffic, parking and lighting, accidents, traffic control devices and the Motor Vehicles Act.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Road development plans in India
    • Classification of roads and road patterns
    • Highway alignment
    • Traffic characteristics and studies
    • Design of intersections
    • Accident and parking studies
    • Highway lighting
    • Traffic control devices
  2. Unit 2: Geometric Design

    10 hours

    Road user and vehicle characteristics and design standards; cross-section elements; stopping and overtaking sight distance; horizontal curves, superelevation, widening and transition curves; summit and valley curves; IRC standards and hill roads; types of pavements.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Highway cross-section elements
    • Sight distance
    • Design of horizontal alignment
    • Design of vertical alignment
    • Flexible and rigid pavements
  3. Unit 3: Highway Materials; Construction and Maintenance

    10 hours

    AASHO classification and group index of subgrade soils, stabilisation and CBR; aggregate properties and tests; bituminous materials, cutbacks and emulsions; geotextiles; construction and maintenance of earth, gravel, WBM, WMM, bituminous and concrete roads and pavement failures.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Subgrade soil and CBR test
    • Tests on road aggregates
    • Bituminous binders and modified bitumen
    • Construction of flexible and rigid pavements
    • Pavement evaluation and maintenance
  4. Unit 4: Bridges: General, Hydrology and Loads

    9 hours

    Components and classification of bridges, data collection, site selection and economic span; design flood, waterway, scour depth, depth of foundation, afflux, clearance and free board; IRC loads, forces and critical combinations.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Classification and components of bridges
    • Bridge site investigation and scour
    • Bridge hydrology: design flood, waterway and afflux
    • Economic span and scour depth
    • IRC loads on bridges
  5. Unit 5: Bridge Substructure, Superstructure and Maintenance

    9 hours

    Open, pile and well foundations, pneumatic caissons and cofferdams; abutments, piers and wing walls; culverts, causeways and minor and major bridges, precast, post-tensioned and segmental construction and launching; bearings; rating, inspection, repair and maintenance of bridges, corrosion and aesthetics.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Bridge substructure
    • Culverts and causeways
    • Fixed span bridge types
    • Bridge bearings
    • Bridge inspection

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.