GUG TY Civil syllabus

GUG · Third Year B.Tech. Civil Engineering · NEP 2020

Theory of Structure

STPCCCEC503 · Semester V · 3 credits · IE 10 + mid-semester 10 + ESE 80

The scanned syllabus is partly illegible between Units II and III; the units follow the course outcomes and the printed hours.

  1. Unit 1: Three Moments and Slope Deflection

    8 hours

    Fixed and continuous beams by the theorem of three moments, including sinking of supports; the slope-deflection method applied to indeterminate and continuous beams.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Fixed beams
    • Theorem of three moments
    • Slope-deflection equations
    • Beams by slope deflection
  2. Unit 2: Influence Line Diagrams

    8 hours

    Rolling concentrated and uniformly distributed loads on simply supported beams, maximum bending moment and shear force; influence lines for reactions, bending moment and shear force in simply supported beams, cantilevers and overhanging beams.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Influence lines for beams
    • Rolling loads and absolute maximum bending moment
    • Müller-Breslau principle
  3. Unit 3: Moment Distribution Method

    10 hours

    Analysis of continuous beams and simple portal frames, without and with sway, by moment distribution.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stiffness, carry-over and distribution factors
    • Beams by moment distribution
    • Non-sway frames by moment distribution
    • Sway frames by moment distribution
  4. Unit 4: Column Analogy

    6 hours

    The column analogy method and its application to beams; stiffness and carry-over factors of non-prismatic members.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Column analogy method
  5. Unit 5: Matrix Method

    12 hours

    Element (local) and global stiffness matrices for beam members with and without axial deformation; continuous beams without sinking of supports; assembling the structure stiffness matrix; member load matrices for concentrated and uniformly distributed loads.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Flexibility and stiffness concepts
    • Stiffness method: structure and member approaches
    • Beams by the stiffness method

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.