GUG · Third Year B.Tech. Civil Engineering · NEP 2020
Geotechnical Engineering
STPCCCEC504 · Semester V · 3 credits · IE 10 + mid-semester 10 + ESE 80
Unit 1: Properties of Soil; Permeability and Seepage
9 hoursMajor soil deposits of India; the three-phase system and weight-volume relations, index properties and IS classification; single-grained, honeycombed, flocculated and dispersed structure; Darcy's law, constant- and falling-head tests to IS 2720 and pumping tests to IS 5529, layered soils, seepage forces, the general flow equation and flow nets.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Soil formation, structure and clay minerals
- Three-phase system and weight–volume relationships
- Index properties of soil
- Soil classification systems
- Darcy's law and permeability
- Permeability tests in the laboratory and field
- Permeability of stratified soils
- Seepage pressure and quicksand
- Flow nets and seepage discharge
Unit 2: Compaction and Consolidation
9 hoursCompaction and the factors affecting it, dry density-moisture content relation and the zero-air-voids line; standard and modified Proctor tests; field compaction of cohesive and cohesionless soils; consolidation, the coefficient and degree of consolidation and pre-consolidation pressure.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Compaction and Proctor tests
- Field compaction and its control
- Terzaghi's one-dimensional consolidation
- Consolidation test
Unit 3: Shear Strength and Bearing Capacity
9 hoursMohr's circle and the Mohr-Coulomb criterion, effective stress, peak and residual strength; direct, unconfined and triaxial tests under different drainage conditions and the vane shear test; types of foundations, Terzaghi's and Meyerhof's bearing capacity, shear failure and settlement criteria, SPT and plate load data.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Effective stress principle
- Mohr–Coulomb failure theory
- Direct shear test
- Triaxial test and drainage conditions
- Unconfined compression and vane shear tests
- Terzaghi's bearing capacity theory
- Meyerhof, Hansen, Vesic and IS methods
- Field tests: SPT and cone penetration
- Plate load test
Unit 4: Lateral Earth Pressure
9 hoursEarth pressure on vertical walls and the effect of wall movement, earth pressure at rest; Rankine's theory with submerged, surcharged and sloping backfill; Coulomb's theory, Culmann's method and Poncelet's construction.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Earth pressure at rest and plastic equilibrium
- Rankine's earth pressure theory
- Effect of surcharge and submergence on earth pressure
- Coulomb's wedge theory
- Rebhann's, Poncelet's and Culmann's graphical methods
Unit 5: Stability of Slopes
9 hoursClassification of slopes, slope failure and its modes; infinite slopes in cohesive and cohesionless soil; the Swedish slip circle and friction circle methods.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Stability of slopes
- Stability of infinite slopes
- Stability of finite slopes: slip circle method
Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.