GUG TY Civil syllabus

GUG · Third Year B.Tech. Civil Engineering · NEP 2020

Foundation Engineering

STPECCEC606B · Elective III · Semester VI · 3 credits · IE 10 + mid-semester 10 + ESE 80

One of the Elective III options.

  1. Unit 1: Soil Mechanics Fundamentals

    7 hours

    Soil types, characteristics and classification; effective stress, shear strength, permeability and consolidation.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Soil classification systems
    • Effective stress principle
    • Terzaghi's consolidation theory
  2. Unit 2: Site Investigation

    9 hours

    Boring, drilling and in-situ tests (SPT, SCPT, plate load test); sampling and laboratory testing.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Planning subsurface exploration
    • Boring, sampling and samplers
    • SPT and its corrections
    • Cone penetration and pressuremeter tests
    • Plate load test
  3. Unit 3: Shallow Foundations

    10 hours

    Types of shallow foundations; bearing capacity and settlement analysis.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Terzaghi's bearing capacity theory
    • Meyerhof, Hansen, Vesic and IS methods
    • Immediate settlement
    • Allowable and differential settlement
  4. Unit 4: Deep Foundations

    9 hours

    Types of deep foundations, load capacity of piles and the behaviour of pile groups.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Classification and installation of piles
    • Static capacity of piles
    • Pile groups and negative skin friction
    • Piers and caissons
  5. Unit 5: Retaining Structures

    10 hours

    Gravity, cantilever and sheet-pile walls; stability of retaining structures against overturning, sliding and bearing failure.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stability checks for gravity retaining walls
    • Cantilever and anchored sheet piles
    • Design of cantilever retaining walls

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.