GUG · Third Year B.Tech. Civil Engineering · NEP 2020
Environmental Pollution and Control
STPECCEC605B · Elective II · Semester VI · 3 credits · IE 10 + mid-semester 10 + ESE 80
One of the Elective II options.
Unit 1: Air Pollution and Its Effects
10 hoursAir pollution episodes, the atmosphere and its zones, classification and sources of air pollutants and their effects on man, animals, plants and materials.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Classification and sources of air pollutants
- Effects of air pollution on health, plants and property
Unit 2: Meteorology and Air Pollution
10 hoursMeteorological parameters, lapse rate and atmospheric stability, plume behaviour, wind and pollution roses, stack height; the greenhouse effect and ozone depletion.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Lapse rates and atmospheric stability
- Plume behaviour
- Wind rose diagrams
- Stack height and plume rise
- Global effects of air pollution
Unit 3: Sampling, Control and Noise
10 hoursAmbient and stack sampling and collecting particulate and gaseous pollutants; principles and equipment for controlling particulates and gases; diesel and petrol exhaust and its treatment; sources, effects and control of noise.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Ambient air sampling
- Stack monitoring and isokinetic sampling
- Settling chambers and cyclones
- Fabric filters and electrostatic precipitators
- Scrubbers
- Control of gaseous pollutants
- Control of vehicle emissions
- Noise pollution and its control
Unit 4: Solid Waste Management
10 hoursClassification, sources, components, quantity and per-capita generation of solid waste, its physical and chemical characteristics and sampling; composting; sanitary landfills, site requirements and leachate; incineration.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Sources and types of solid waste
- Characteristics and generation of municipal solid waste
- Composting methods
- Sanitary landfill design
- Leachate and landfill gas
- Incineration
Unit 5: Water Pollution
6 hoursSources and types of water pollutants and their effects on aquatic life and humans; wastewater characteristics, primary, secondary and tertiary treatment; prevention by reuse, rainwater harvesting and zero liquid discharge.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Water pollution: sources and kinetics
- Wastewater characteristics and standards
- Wastewater reclamation and reuse
Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.