GUG · Second Year B.Tech. Mechanical Engineering · NEP 2020
Strength of Materials
STPCCMEC404 · Semester IV · 3 credits · IE 10 + mid-semester 10 + ESE 80
Unit 1: Simple Stresses and Strains; Principal Stresses
8 hoursStress and strain, stress-strain diagrams of brittle and ductile materials, Hooke's law, elastic moduli and factor of safety; tapered rods, composite sections and thermal stresses; Poisson's ratio, volumetric strain under uni-, bi- and tri-axial loading and the relations between elastic constants; stresses on oblique sections under direct and shear stress, principal planes and stresses, and Mohr's circle.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Types of loads, stress and strain
- Stress–strain diagrams and factor of safety
- Hooke's law and elastic constants
- Relations between elastic constants
- Bars of varying section and composite bars
- Thermal stresses in plain and composite bars
- Stresses on an oblique plane
- Principal stresses and planes
- Mohr's circle for plane stress
Unit 2: Shear Force, Bending Moment and Stresses in Beams
8 hoursTypes of beams and loads; SF and BM diagrams for cantilever, simply supported and overhanging beams under point loads, UDL and couples; the theory of simple bending, the bending equation, bending stresses and section modulus; shear stress distribution in symmetrical sections, maximum and average shear stress.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Beams, supports and types of loading
- SFD and BMD for point loads and UDL
- SFD and BMD for UVL, couples and combined loads
- Theory of simple bending and the flexure formula
- Bending stress distribution and section modulus
- Shear stress distribution in beams
Unit 3: Slope and Deflection; Strain Energy
8 hoursSlope and deflection of cantilever, simply supported and overhung beams under point loads and UDL by double integration and Macaulay's method, and the relation between slope, deflection and radius of curvature; strain energy under gradual, sudden and impact loads, and in bending and torsion.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Slope and deflection of beams
- Double integration method
- Macaulay's method
- Strain energy under gradual, sudden and impact loads
- Strain energy in bending and torsion
Unit 4: Torsion of Circular Shafts
8 hoursThe torsion equation and its assumptions; strength and rigidity in shaft design; torque transmitted by solid and hollow shafts; equivalent twisting and bending moments for shafts under bending, torque and axial load.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Torsion of circular shafts
- Power transmission by shafts: strength and rigidity
- Combined normal and shear stresses
Unit 5: Thin Cylinders and Spherical Shells
8 hoursLongitudinal and hoop stresses, failure of thin cylinders under internal pressure and their design; deformation of thin and thick cylinders.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Thin cylindrical and spherical shells
- Thick cylinders under internal and external pressure
Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.