GUG SY Mechanical syllabus

GUG · Second Year B.Tech. Mechanical Engineering · NEP 2020

Engineering Thermodynamics

STPCCMEC403 · Semester IV · 3 credits · IE 10 + mid-semester 10 + ESE 80

  1. Unit 1: Introduction to Thermodynamics

    8 hours

    The steam power plant, IC engines, refrigerator, air conditioner and fuel cells as examples; macroscopic and microscopic viewpoints; systems and control volumes, properties, processes and cycles; equilibrium and quasi-static processes; pure substances; the zeroth law; work and heat transfer; the ideal gas.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Thermodynamic systems, properties and processes
    • Zeroth law and temperature measurement
    • Heat and work
    • Point and path functions and PdV work
    • Ideal gas laws and the equation of state
  2. Unit 2: First Law of Thermodynamics

    8 hours

    The first law for a closed system in a cycle and in a change of state; energy and its stored forms, specific heats, enthalpy and PMM-I; the steady-flow energy equation for nozzles, diffusers, throttling devices, turbines, compressors and heat exchangers; SFEE compared with the Euler and Bernoulli equations.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • First law for closed systems and cycles
    • Flow work and non-flow work
    • Steady-flow energy equation and its applications
  3. Unit 3: Second Law and Entropy

    8 hours

    Cyclic heat engines and reservoirs, the Kelvin-Planck and Clausius statements, refrigerators and heat pumps; reversible and irreversible processes, the Carnot cycle and theorem, the thermodynamic temperature scale; the Clausius theorem and inequality, entropy and the entropy principle; entropy transfer and generation in closed, open and steady-flow systems.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Heat engines, refrigerators and heat pumps
    • Kelvin–Planck and Clausius statements
    • Reversible and irreversible processes
    • Carnot cycle and Carnot's theorem
    • Clausius inequality and entropy
    • Principle of increase of entropy
    • Entropy generation in heat transfer and processes
  4. Unit 4: Properties of Pure Substances

    8 hours

    p-v, T-s and h-s diagrams of a pure substance; dryness fraction and its measurement with calorimeters.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Property diagrams of water
    • Steam tables and the Mollier chart
    • Dryness fraction and calorimeters
  5. Unit 5: Vapour and Air-Standard Cycles

    8 hours

    The simple steam power cycle, the Rankine and reheat Rankine cycles; the Otto, Diesel and dual air-standard cycles and their comparison.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Carnot and Rankine cycles
    • Improving Rankine cycle performance
    • Mean effective pressure and air-standard assumptions
    • Otto, Diesel and dual cycles

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.