GUG · Second Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020
Industrial Electronics
STPCCETC404 · Semester IV · 3 credits · IE 10 + mid-semester 10 + ESE 80
Unit 1: Power Semiconductor Devices
9 hoursThe thyristor family; construction, working, V-I characteristics and applications of the SCR, LASCR, DIAC, TRIAC, SCS, PUT, SUS, SBS and GTO; static and dynamic equalising circuits for SCRs.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- SCR construction and characteristics
- Two-transistor analogy of the SCR
- GTO, TRIAC and UJT
- Thyristor family: LASCR, DIAC, SCS, PUT, SUS and SBS
- Series and parallel operation of SCRs: equalising circuits
Unit 2: Triggering Methods of SCR
10 hoursTurn-on mechanisms: high voltage, thermal, dv/dt and gate triggering; resistance, RC, half- and full-wave, UJT and pulse-transformer triggering circuits; turn-off.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- SCR turn-on, turn-off and gate triggering
- Resistance, RC and UJT triggering circuits
- Pulse-transformer gate triggering
Unit 3: Commutation Methods of SCR
7 hoursNatural and forced commutation; commutation classes A to F, their construction and working.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Line and forced commutation
- SCR commutation classes A to F
Unit 4: Phase Controlled Rectifiers
10 hoursFiring and conduction angles; the single-phase half-wave controlled rectifier with R and RL loads and the freewheeling diode; single-phase centre-tapped and bridge controlled rectifiers; the three-phase controlled rectifier with R load.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Half-wave controlled rectifier with R and RL loads
- Single-phase semi-converter
- Single-phase full converter
- Three-phase controlled bridge converters
- Rectifier performance parameters: ripple, displacement and power factor
Unit 5: Power Converters
9 hoursClassification, block diagrams and working of inverters, choppers and cycloconverters; online and offline UPS; the SMPS: concept, block diagram and applications.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Single-phase half-bridge and full-bridge inverters
- Step-down and step-up choppers
- Cycloconverters
- UPS, battery chargers and LED drivers
- SMPS: buck and boost converters
- Linear versus switch-mode power supplies
Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.