GUG SY E&TC syllabus

GUG · Second Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020

Automatic Control System

STPCCETC405 · Semester IV · 3 credits · IE 10 + mid-semester 10 + ESE 80

  1. Unit 1: Introduction to Control Systems and Modelling

    9 hours

    Classification of control systems; mathematical models of mechanical and electrical systems, analogous systems; transfer functions of SISO systems and how to derive them; block diagram reduction and signal flow graphs.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Open-loop and closed-loop control systems
    • Mathematical models of physical systems
    • Analogous systems: force-voltage and force-current analogies
    • Transfer function, poles and zeros, order and type
    • Block diagram reduction
    • Signal flow graphs and Mason's gain formula
  2. Unit 2: Time Domain Analysis

    9 hours

    Transient and steady-state response; standard test inputs; order and type of a system; transient analysis of first- and second-order systems and the specifications of an underdamped step response; steady-state error and static error constants.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Standard test signals for time-domain analysis
    • Response of first-order systems
    • Second-order systems and time-domain specifications
    • Steady-state error and static error constants
  3. Unit 3: Stability Analysis

    9 hours

    The characteristic equation, poles and zeros and the response of pole locations in the s-plane; absolute and relative stability; the Routh-Hurwitz criterion; root locus construction, dominant poles and the effect of added poles and zeros.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Characteristic equation and pole locations
    • Routh–Hurwitz stability criterion
    • Root locus: rules and construction
    • Effect of adding poles and zeros on the root locus
  4. Unit 4: Frequency Domain Analysis

    9 hours

    Frequency response and its specifications and their correlation with time-domain specifications; the polar plot; the Nyquist criterion and Nyquist plot; Bode plots; stability from Nyquist and Bode plots.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Frequency response and frequency-domain specifications
    • Polar plot
    • Nyquist stability criterion
    • Bode plot
    • Gain margin and phase margin
  5. Unit 5: Controllers and State Space Representation

    9 hours

    The ON-OFF controller and dead zone; P, I, D, PI, PD and PID controllers; state-space representation, its advantages, and the transfer function.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • ON–OFF controllers
    • P, PI, PD and PID controllers
    • State-space representation
    • Transfer function from state space

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.