GUG · Second Year B.Tech. Electronics and Telecommunication Engineering · NEP 2020
Analog & Digital Communication
STPCCETC403 · Semester IV · 3 credits · IE 10 + mid-semester 10 + ESE 80
Unit 1: AM Transmitters and Receivers
9 hoursNeed for modulation; AM, its modulation index and power relations; AM modulation and demodulation; DSB-FC, DSB-SC and SSB-SC compared; high- and low-level AM transmitters; TRF and superheterodyne receivers; AGC; selectivity, sensitivity and fidelity.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Need for modulation and amplitude modulation
- AM spectrum, modulation index and power
- DSB-SC modulation
- SSB and VSB modulation
- Generation of AM: low and high-level modulation
- TRF and superheterodyne receivers
- Automatic gain control
- Receiver characteristics: sensitivity, selectivity, fidelity and image rejection
Unit 2: FM Transmitters and Receivers
9 hoursFrequency modulation and direct FM generation using a FET; narrowband and wideband FM; pre-emphasis and de-emphasis; the FM receiver with limiter; single-slope and balanced-slope detectors, Foster-Seeley and ratio detectors; AM and FM compared.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Frequency modulation and modulation index
- Direct FM generation: FET and varactor-diode modulators
- Narrowband and wideband FM
- Pre-emphasis and de-emphasis
- Slope and ratio detectors
- Foster–Seeley discriminator
Unit 3: Pulse Modulation and Multiple Access System
9 hoursThe sampling theorem and Nyquist criterion, ISI; ideal, natural and flat-top sampling, aliasing and the aperture effect; PAM, PWM and PPM; FDMA, TDMA and CDMA.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Sampling theorem and types of sampling
- Aliasing and aperture effect
- Inter-symbol interference
- PAM, PWM and PPM
- SDMA, TDMA, FDMA and CDMA
Unit 4: Introduction to Digital Communication System
9 hoursFunctional blocks of a digital communication system; PCM generation and reconstruction, quantisation; differential PCM, delta and adaptive delta modulation; the Shannon-Hartley theorem, measure of information, entropy and information rate.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Pulse code modulation
- Quantisation and companding
- Delta-sigma modulation and DPCM
- Delta and adaptive delta modulation
- Entropy and information
- Shannon–Hartley theorem
Unit 5: Digital Modulation
9 hoursNeed for digital modulation; BPSK, DPSK, QPSK, OQPSK and M-ary PSK; ASK and QAM; BFSK and M-ary FSK; MSK transmitter and receiver.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- BASK, BFSK and BPSK
- Differential phase-shift keying
- QPSK, OQPSK and M-ary PSK
- M-ary QAM
- QASK and MSK
Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.