GUG SY Electrical syllabus

GUG · Second Year B.Tech. Electrical Engineering · NEP 2020

Renewable Energy Sources

STPCCELE404 · Semester IV · 3 credits · IE 10 + mid-semester 10 + ESE 80

Units III–V in the PDF end with stray unit titles from Network Analysis; they are not part of this course.

  1. Unit 1: Introduction to Sustainable Energy Systems

    8 hours

    Environmental consequences of fossil fuels; the importance, types and limits of renewable sources; sustainable design; the Indian and international energy scenario.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Conventional and non-conventional energy sources in India
    • Overview of non-conventional energy technologies
    • Environmental consequences of fossil fuel use
  2. Unit 2: Solar PV and Thermal Systems

    8 hours

    Solar radiation and its measurement; solar thermal and central-receiver power plants, solar ponds, thermal storage with phase-change materials; the PV effect, types of PV systems and cells; cells, modules and arrays, I-V characteristics, series and parallel connection, MPPT and applications.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Solar radiation measurement: pyranometer and pyrheliometer
    • Concentrating solar power
    • Solar ponds
    • Sensible, latent and thermochemical heat storage
    • Types of solar cells and PV module manufacturing
    • Solar cell I-V and P-V characteristics
    • Solar PV system design
    • Maximum power point tracking
  3. Unit 3: Wind Energy

    8 hours

    Principle and efficiency of wind energy conversion, site selection; components of wind power generation, horizontal- and vertical-axis turbines, wind speed and towers; applications.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Power in the wind and the Betz limit
    • Components and classification of wind energy conversion systems
    • Horizontal and vertical-axis wind machines
    • Site and turbine selection
  4. Unit 4: Geothermal Energy

    8 hours

    Geothermal fields and power estimates; dry-steam, binary-fluid and geothermal-preheat hybrid plants; advantages, disadvantages and applications; geothermal energy in India.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Geothermal energy
    • Geothermal power plants: steam, binary and hybrid
  5. Unit 5: Other Energy Sources

    8 hours

    Tidal energy, barrage and non-barrage systems; wave energy and wave power devices; OTEC; hydrogen production and storage; fuel cells; energy storage and hybrid systems.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • OTEC and tidal energy
    • Wave energy devices
    • Hydrogen production and storage
    • Fuel cells
    • Types of energy storage
    • Hybrid renewable systems

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.