GUG SY Electrical syllabus

GUG · Second Year B.Tech. Electrical Engineering · NEP 2020

Network Analysis

STPCCELE304 · Semester III · 3 credits · IE 10 + mid-semester 10 + ESE 80

  1. Unit 1: Circuit Analysis Techniques

    8 hours

    Nodal and mesh analysis; superposition, Thevenin's, Norton's, maximum power transfer, reciprocity, compensation and Millman's theorems; duality and dual networks; source transformation.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Mesh analysis and supermesh
    • Nodal analysis and supernode
    • Source transformation
    • Superposition theorem
    • Thevenin's and Norton's theorems
    • Maximum power transfer theorem
    • Reciprocity and Millman's theorems
    • Compensation theorem
    • Duality
  2. Unit 2: DC Transient Circuits

    8 hours

    Source-free RL, RC and RLC circuits; natural and forced response of RL, RC and RLC circuits; RC and RL circuit responses to pulse and exponential signals.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Initial and final conditions
    • Time constants of RL and RC circuits
    • Transient response of RL and RC circuits
    • Transient response of RLC circuits
    • Response to step, ramp and exponential inputs
  3. Unit 3: Sinusoidal Steady-State Analysis

    8 hours

    Sinusoids as rotating phasors, phasor diagrams, impedance and admittance; AC circuit analysis, RMS values, average and complex power; three-phase circuits; mutually coupled circuits, the dot convention and the ideal transformer.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • AC analysis of series and parallel RLC circuits
    • Balanced and unbalanced three-phase systems
    • Real and reactive power in three-phase circuits
    • Dot convention for coupled circuits
    • Ideal transformer
  4. Unit 4: Networks and the Laplace Transform

    8 hours

    Laplace transform review; circuit analysis with Laplace transforms for standard inputs, the convolution integral and inverse transforms; transformed networks with initial conditions; transfer functions, poles and zeros; frequency response; series and parallel resonance.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Laplace transforms of circuit elements
    • Transformed networks with initial conditions
    • Solving RLC circuits with Laplace transforms
    • Network functions of one-port and two-port networks
    • Poles and zeros of network functions
    • Series resonance
    • Parallel resonance, bandwidth and Q factor
  5. Unit 5: Two-Port Networks and Filters

    8 hours

    Two-port variables; short-circuit admittance, open-circuit impedance, transmission and hybrid parameters and the relations between them; interconnection of two-ports. Filters: characteristic impedance, constant-k low-pass and high-pass, band-pass and band-reject filters.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Z, Y and transmission parameters
    • Hybrid parameters of two-port networks
    • Relationships between two-port parameters
    • Interconnection of two-port networks
    • Passive low-pass and high-pass filters

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.