GUG SY Electrical syllabus

GUG · Second Year B.Tech. Electrical Engineering · NEP 2020

Measurement & Instrumentation

STPCCELE305 · Semester III · 3 credits · IE 10 + mid-semester 10 + ESE 80

  1. Unit 1: Measuring Instruments

    8 hours

    Classification of instruments; deflecting, controlling and damping torques; PMMC, moving-iron and electrodynamometer ammeters and voltmeters: principle, torque equation, errors, merits and demerits; analog and digital, absolute and secondary, indicating and recording instruments; shunts and multipliers.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Classification of measuring instruments
    • Deflecting, controlling and damping systems
    • PMMC instruments
    • Moving-iron instruments
    • Extending the range of ammeters and voltmeters
    • Resolution and sensitivity of digital meters
  2. Unit 2: Generalized Instrumentation System

    8 hours

    The general instrumentation system; active and passive transducers; strain gauges; resistive, inductive and capacitive transducers for displacement, velocity, force and torque; static and dynamic characteristics; statistical treatment of errors, the Gaussian error distribution and combination of errors.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Classification and selection of transducers
    • Strain gauges, shaft encoders and tachometers
    • LVDT and RVDT
    • Static and dynamic characteristics of instruments
    • Types of errors in measurement
    • Measurement errors and statistical analysis
  3. Unit 3: Measurement of Power and Energy

    8 hours

    Active and reactive power in single- and three-phase circuits with dynamometer instruments and their errors; energy measurement in single- and three-phase circuits and its errors; the maximum demand indicator.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Dynamometer wattmeter
    • Two-wattmeter method
    • Reactive power measurement in three-phase circuits
    • Single-phase induction energy meter
    • Maximum demand indicators
  4. Unit 4: Measurement of Circuit Parameters

    8 hours

    Low resistance by Kelvin's double bridge, medium resistance by the Wheatstone bridge, high resistance by loss of charge; the earth resistance tester; general theory of AC bridges, Maxwell's, De Sauty's and Schering bridges, detectors for AC bridges.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Kelvin's double bridge
    • Wheatstone bridge
    • Measuring high resistance: loss of charge and megger
    • Earth resistance measurement
    • AC bridge balance equation
    • Maxwell's bridges
    • Anderson, De Sauty and Wien bridges
    • Schering bridge
  5. Unit 5: Miscellaneous Measurement

    8 hours

    Thermoelectric laws, thermocouples, thermistors and optical pyrometers, temperature compensation; manometers, bellows, Bourdon tubes and diaphragms; power factor and frequency measurement; instrument transformers, extending range with CTs and PTs.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Thermocouples, thermistors and RTDs
    • Pressure measurement: manometers, Bourdon tube, bellows, diaphragms
    • Electrodynamometer power factor meter
    • Digital voltmeter and frequency meter
    • Current and potential transformers
    • Ratios and burden of instrument transformers

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.