GUG · Second Year B.Tech. Civil Engineering · NEP 2020
Surveying
STPCCCEC404 · Semester IV · 3 credits · IE 10 + mid-semester 10 + ESE 80
Unit IV's GIS and Unit V's remote sensing link to the geo-informatics notes.
Unit 1: Chain, Compass and Plane Table Surveying; Levels and Theodolites
9 hoursPrinciples of surveying, chain survey, ranging and offsets; the prismatic compass, bearings, local attraction, magnetic declination and compass traversing; plane table methods, two- and three-point problems and Lehmann's rules; the dumpy level, its axes and adjustments, reciprocal levelling, curvature and refraction; vernier and micro-optic theodolites and their permanent adjustments.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Principles and classification of surveying
- Chain surveying: stations, lines and offsets
- Compass traversing and bearings
- Local attraction and magnetic declination
- Plane table surveying
- Levels and levelling terms
- Two-peg test
- Curvature, refraction and reciprocal levelling
- Theodolite and its adjustments
Unit 2: Tacheometry, Contouring and Theodolite Traversing
9 hoursThe stadia principle, fixed-hair tacheometry and tacheometric contour surveys; direct and indirect contouring, profile levelling, longitudinal and cross sections, toposheets; horizontal angles by repetition and reiteration, vertical angles and setting out; consecutive and independent coordinates, adjusting closed traverses by the transit and Bowditch rules, Gale's traverse table, omitted measurements and areas; open traverses.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Stadia tacheometry
- Tacheometric constants
- Contours and contouring
- Types of levelling
- Measuring horizontal and vertical angles
- Latitudes and departures
- Balancing a traverse
- Omitted measurements
Unit 3: Geodetic Surveying
9 hoursObjects and methods of geodetic surveying, trilateration; triangulation systems and figures, strength of figure and the well-conditioned triangle; selecting stations, intervisibility and station heights; towers and signals and phase correction; satellite stations, reduction to centre, reduction to mean sea level and extension of base.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Triangulation systems, figures and strength of figure
- Triangulation stations, signals and satellite stations
Unit 4: Photogrammetry and GIS
9 hoursObjects and applications of photogrammetry, the aerial camera, maps and vertical photographs, vertical, tilted and oblique photographs and their scale, the mirror stereoscope and photo interpretation; definition, data models and components of GIS and its applications in civil engineering.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Aerial photographs: scale, relief displacement and flying height
- Stereoscopy and parallax heights
- Photo interpretation and applications of photogrammetry
- Vector and raster data models
- Applications in civil engineering
Unit 5: Advanced Surveying Techniques
9 hoursGPS and differential GPS and their applications to civil engineering; electromagnetic waves and EDM instruments; the total station, its parameters and uses, and the optical theodolite; basic principles of remote sensing, the electromagnetic spectrum and classes of remote-sensing systems.
Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then
- GPS, GIS and remote sensing
- Differential GPS
- Electronic distance measurement
- Total station surveying
- Electromagnetic radiation and the spectrum
Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.