GUG SY Civil syllabus

GUG · Second Year B.Tech. Civil Engineering · NEP 2020

Strength of Material

STPCCCEC304 · Semester III · 4 credits · IE 10 + mid-semester 10 + ESE 80

  1. Unit 1: Mechanical Properties and Uni-axial Problems

    9 hours

    Types of force distribution, stress and strain, stress-strain behaviour of ductile and brittle materials, elastic, plastic and strain-hardened zones, elastic constants and their relations; statically indeterminate problems under axial loading; thin-walled cylindrical and spherical pressure vessels under internal pressure.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stress, strain and stress–strain diagrams
    • Elastic constants and their relations
    • Statically indeterminate bars
    • Thin cylinders and spheres
  2. Unit 2: Axial Force, Shear Force and Bending Moment Diagrams

    9 hours

    Free-body diagrams and types of loads; axial force, shear force and bending moment at a section; AF, SF and BM diagrams of beams; the differential relations between load, shear force and bending moment.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Shear force and bending moment: concepts and relations
    • SFD and BMD for point loads and UDL
    • SFD and BMD for UVL and couples
    • Points of contraflexure
  3. Unit 3: Stresses in Beams

    9 hours

    Simple bending theory: assumptions, derivation and the relation between bending moment, bending stress and curvature for homogeneous and composite beams; shear stresses, shear flow and shear stress distribution, including composite beams; combined bending moment and axial force.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Theory of simple bending and the flexure formula
    • Bending stress distribution and moment of resistance
    • Flitched beams
    • Shear stress formula
    • Shear stress distribution across sections
    • Direct and bending stresses: eccentric loading
  4. Unit 4: Torsion of Shafts and Deflection of Beams

    9 hours

    Torsion of circular sections: torsional moment, shear stress and angle of twist in solid and hollow shafts, thin-walled hollow sections, closely coiled helical and leaf springs; the moment-curvature equation, deflection by integration and Macaulay's method.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Torsion of circular shafts
    • Torsion of thin-walled hollow sections
    • Closely coiled helical springs
    • Leaf springs
    • Double integration and moment-area methods
    • Slope and deflection by Macaulay's method
  5. Unit 5: State of Stress in Two Dimensions

    9 hours

    Differential equations of equilibrium and transformation of stresses; principal and maximum shear stresses, Mohr's circle; combined bending and torsion and torsion with shear; shear flow and the shear centre of thin-walled sections; unsymmetrical bending.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stresses on an oblique plane
    • Principal stresses and maximum shear stress
    • Mohr's circle
    • Combined bending and torsion of shafts
    • Shear flow and shear centre
    • Unsymmetrical bending

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.