GUG SY Civil syllabus

GUG · Second Year B.Tech. Civil Engineering · NEP 2020

Fluid Mechanics

STPCCCEC305 · Semester III · 3 credits · IE 10 + mid-semester 10 + ESE 80

  1. Unit 1: Properties of Fluids; Dimensional Analysis and Model Studies

    9 hours

    Density, specific weight and volume, relative density; Newton's law of viscosity, dynamic and kinematic viscosity, rheological classification; compressibility, cohesion, adhesion, surface tension, capillarity and vapour pressure; dimensional homogeneity and dimensionless parameters; geometric, kinematic and dynamic similitude, model laws and types of models.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Properties of fluids
    • Viscosity and Newton's law of viscosity
    • Surface tension and capillarity
    • Dimensional analysis: Rayleigh and Buckingham π methods
    • Model similitude and dimensionless numbers
  2. Unit 2: Fluid Statics; Buoyancy and Floatation

    9 hours

    The hydrostatic equation and pressure head; absolute and gauge pressure; piezometers, simple, differential and inclined manometers and pressure transducers; total pressure and centre of pressure on plane and curved surfaces (gates, dams, lock gates); buoyancy, stability of floating and submerged bodies, metacentric height; liquids under uniform linear acceleration and rotation.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Pressure and its measurement
    • Total pressure and centre of pressure
    • Pressure on curved surfaces
    • Buoyancy and metacentric height
    • Liquids in relative equilibrium
  3. Unit 3: Fluid Kinematics and Dynamics; Notches and Weirs

    9 hours

    Describing fluid motion, velocity and acceleration; types of flow; rotational and irrotational motion, circulation and vorticity, Cauchy-Riemann equations, velocity potential, stream function and flow nets; Euler's equation and Bernoulli's equation, energy and momentum correction factors, HGL and TEL; linear and angular momentum; orifices and mouthpieces, venturimeter, orifice and nozzle meters, rotameter and Pitot tube; rectangular, triangular, trapezoidal and Cipolletti notches.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Velocity and acceleration of fluid particles
    • Types of flow and flow lines
    • Continuity equation
    • Velocity potential and stream function
    • Flow nets
    • Euler's equation and Bernoulli's equation
    • Hydraulic gradient and energy lines
    • Momentum equation and its applications
    • Orifices and mouthpieces
    • Venturimeter and orifice meter
    • Pitot tube and rotameter
    • Notches and weirs
  4. Unit 4: Laminar Flow and Boundary Layer Theory

    9 hours

    Reynolds' experiment; laminar flow through a circular pipe and between fixed parallel plates, Stokes' law and measuring viscosity; flow through porous media and Darcy's law; the boundary layer on a flat plate, its thicknesses, laminar, turbulent and transitional layers, drag coefficients, smooth and rough boundaries, separation and its control.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Reynolds' experiment
    • Laminar flow: Hagen–Poiseuille equation
    • Laminar flow between fixed parallel plates
    • Darcy's law and permeability
    • Boundary layer theory and separation
    • Drag and lift
  5. Unit 5: Flow through Pipes; Turbulent Flow

    9 hours

    Major and minor losses; simple, compound, parallel and branched pipes and siphons, Dupuit's equation, power transmission through pipes, the three-reservoir problem and pipe networks; turbulence, Boussinesq's and Prandtl's mixing-length theories, velocity distribution for smooth and rough boundaries, Nikuradse's experiments and friction factors of commercial pipes.

    Examined in the 80-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Turbulent flow and Darcy–Weisbach equation
    • Minor losses in pipes
    • Pipes in series and parallel
    • Siphons, water hammer and power through nozzles
    • Three-reservoir problems and pipe networks with EPANET
    • Prandtl's mixing length and velocity distribution
    • Surge tanks and the Moody chart

Unit contents are summarised from the official GUG syllabus . AiCanCode.org is not affiliated with Gondwana University, Gadchiroli.