DBATU · Third Year B.Tech Mechanical Engineering · NEP 2020
Heat Transfer
Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
Unit 1: Introduction and Steady State Conduction
Modes and laws of heat transfer; thermal conductivity; the general conduction equation and boundary conditions; one-dimensional conduction through slabs, cylinders, spheres and composite systems.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Modes of heat transfer and their laws
- General heat conduction equation
- Steady conduction through plane walls
- Conduction through cylinders and spheres
Unit 2: Overall Heat Transfer, Extended Surfaces and Unsteady Conduction
Contact resistance; critical radius of insulation; the electrical analogy and overall coefficient; heat generation; variable conductivity; fins; lumped analysis, Biot and Fourier numbers and Heisler charts.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Thermal resistance networks and overall coefficient
- Critical radius of insulation
- Conduction with internal heat generation
- Heat transfer from fins
- Lumped heat capacity analysis
- Biot and Fourier numbers and Heisler charts
Unit 3: Principles of Convection
Continuity, momentum and energy equations; hydrodynamic and thermal boundary layers; dimensionless groups; the Reynolds analogy; forced convection in pipes and across cylinders, spheres and tube banks; free convection from plates, cylinders and spheres.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Convection and boundary layers
- Dimensionless numbers in convection
- Forced convection correlations
- Natural convection
Unit 4: Heat Exchangers
Classification; temperature distributions in parallel and counter flow; overall coefficient; LMTD and effectiveness–NTU methods; selection of heat exchangers; TEMA standards.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Classification of heat exchangers and fouling
- LMTD method
- Effectiveness–NTU method
Unit 5: Radiation Heat Transfer
Thermal and black-body radiation and its laws; radiation properties; atmospheric and solar radiation; view factors; exchange between black, grey and diffuse surfaces; radiation shields.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Laws of thermal radiation
- Radiation properties of surfaces
- Shape factors
- Radiation exchange between surfaces
- Radiation shields
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).