DBATU TY Mechanical syllabus

DBATU · Third Year B.Tech Mechanical Engineering · NEP 2020

Fluid Machinery

Elective I · Semester V · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective I options.

  1. Unit 1: Momentum Equation and Fundamentals of Hydrodynamic Machines

    Impulse–momentum on fixed and moving plates and curved vanes; velocity triangles; Euler's equation for turbomachines; degree of reaction, heads and efficiencies.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Impact of jets on vanes
    • Velocity triangles and work done
    • Classification of turbomachines
  2. Unit 2: Impulse and Reaction Turbines

    The Pelton wheel, its buckets, jet and speed ratios; Francis, Kaplan, propeller and Deriaz turbines; draft tubes; cavitation; mini and micro turbines.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Pelton wheel
    • Francis and Kaplan turbines
    • Draft tubes, governing and cavitation
  3. Unit 3: Governing of Turbines

    Governing methods; performance characteristics; safety devices; turbine selection; unit quantities and specific speed; similarity and model testing.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Unit quantities, specific speed and model testing
  4. Unit 4: Centrifugal Pump

    Construction and terminology; velocity triangles; cavitation, NPSH and Thoma's factor; priming; specific speed and characteristics; axial thrust; multistage pumps and series and parallel operation; model testing.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Components and working of centrifugal pumps
    • Velocity triangles of pumps
    • Heads and efficiencies of pumps
    • Specific speed and priming
    • Series and parallel pumps
  5. Unit 5: Special Purpose Pumps

    Chemical, nuclear, sewage and submersible pumps; installation and energy-efficient pumps; pump failures and troubleshooting; reciprocating, gear, vane and lobe pumps.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Special-purpose pumps and pump troubleshooting
    • Reciprocating and rotary positive-displacement pumps

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).