DBATU TY Mechanical syllabus

DBATU · Third Year B.Tech Mechanical Engineering · NEP 2020

Finite Element Method

Elective II · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective II options.

All notes for this subject
  1. Unit 1: Introduction

    Need, advantages and limitations of FEA and its procedure; matrix algebra: operations, differentiation, integration, inverse, eigenvalues and eigenvectors, positive-definite matrices and Gauss elimination.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Finite element terminology and steps
    • Matrix operations for FEA
    • Eigenvalues and eigenvectors in FEA
    • Gaussian elimination
  2. Unit 2: Elements of Elasticity

    Stress at a point and equilibrium equations; 2-D stress, strains and displacements; stress–strain relations; plane stress and plane strain.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Stress, strain and equilibrium relations
    • Plane stress and plane strain
  3. Unit 3: One-Dimensional Problems

    FE modelling with bar elements; shape functions; the potential-energy approach; the global stiffness matrix; treating boundary conditions.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Shape functions and their properties
    • Potential energy and equilibrium
    • Bar and spring element stiffness matrices
    • Assembly of the global stiffness matrix
    • Boundary conditions: elimination and penalty approaches
  4. Unit 4: Trusses and Frames

    Plane trusses, element stiffness and stress calculation; plane frames.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Truss and plane frame elements
  5. Unit 5: Two-dimensional Problems

    Scope of 2-D FEA; modelling 2-D problems; the constant strain triangle; other elements (no mathematics); boundary conditions.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Constant strain triangle
    • Quadrilateral elements

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).