DBATU TY E&TC syllabus

DBATU · Third Year B.Tech Electronics & Telecommunication Engineering · NEP 2020

Microwave Theory and Techniques

26AF1372PE607A · Elective III · Semester VI · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective III options.

  1. Unit 1: Transmission Lines and Waveguides

    History, bands and applications of microwaves; TEM, TE and TM solutions; parallel-plate and rectangular waveguides and their parameters; coaxial lines; rectangular and circular cavity resonators.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Microwave frequency bands and applications
    • TE and TM field components
    • Parallel-plate waveguide
    • Rectangular waveguides and modes
    • Cut-off frequency and dominant mode
    • Cavity resonators
  2. Unit 2: Microwave Components

    E-plane, H-plane and magic tees and directional couplers; ferrites, Faraday rotation, gyrators, isolators and circulators; striplines, microstrip, parallel-strip, coplanar and shielded strip lines.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • E-plane, H-plane and magic tees
    • Directional couplers
    • Ferrites and Faraday rotation
    • Isolators and circulators
    • Striplines
    • Microstrip and coplanar lines
  3. Unit 3: Microwave Network Analysis

    Equivalent voltages, currents and impedance; impedance, admittance and ABCD matrices; the scattering matrix and its properties; S-matrices of tees, directional couplers, isolators and circulators.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Impedance, admittance and ABCD matrices
    • Scattering parameters
    • S-matrices of tees, couplers, isolators and circulators
  4. Unit 4: Microwave Tubes

    Limitations of conventional tubes; O- and M-type tubes; re-entrant cavities and velocity modulation; two-cavity and reflex klystrons and the Applegate diagram; the cylindrical travelling-wave magnetron, Hull cut-off and π mode; slow-wave structures and the helix TWT.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Limitations of conventional tubes at microwaves
    • Velocity modulation and klystrons
    • Reflex klystron
    • Cavity magnetron
    • Hull cut-off and Hartree conditions
    • Helix travelling wave tube
  5. Unit 5: Microwave Solid-state Devices and Measurements

    Microwave BJTs, FETs and MESFETs; varactor, PIN, Schottky and tunnel diodes; TEDs and Gunn diodes; IMPATT and TRAPATT diodes; slotted line, detector, VSWR and power meters; S-parameter, frequency, power, attenuation, phase, VSWR, impedance and cavity-Q measurement.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Microwave transistors
    • PIN, tunnel and Schottky diodes
    • Varactor diodes and parametric amplifiers
    • Gunn diode
    • IMPATT and TRAPATT diodes
    • Microwave bench
    • Microwave measurements: VSWR, power and impedance
    • Measurement of cavity Q

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).