DBATU TY E&TC syllabus

DBATU · Third Year B.Tech Electronics & Telecommunication Engineering · NEP 2020

Digital Signal Processing

26AF1372PC501 · Semester V · 4 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

  1. Unit 1: DSP Preliminaries

    7 hours

    Discrete-time sequences; representing signals on an orthogonal basis; sampling and reconstruction; the basic elements of DSP and its advantages over analog processing.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Advantages of digital signal processing
    • Basis functions and orthogonality
    • Sampling and reconstruction of analog signals
    • DSP system elements and DSP processors
  2. Unit 2: Discrete Fourier Transform

    7 hours

    The DTFT and frequency-domain sampling; the DFT and its properties; circular and linear convolution and computing one through the other; radix-2 decimation-in-time and decimation-in-frequency FFT.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Discrete-time Fourier transform and frequency-domain sampling
    • Discrete Fourier transform
    • Properties of the DFT
    • Circular convolution and linear convolution via DFT
    • Radix-2 DIT FFT
    • Radix-2 DIF FFT
  3. Unit 3: Z-Transform

    7 hours

    Need for the transform and its relation to the Laplace and Fourier transforms; ROC and Z-transform properties; pole locations, causality and stability; inverse Z-transform by power series and partial fractions; solving difference equations.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Z-transform and its relation to Laplace and Fourier
    • Region of convergence and its properties
    • Pole locations, causality and stability
    • Inverse Z-transform: power series and partial fractions
    • Solving difference equations with the Z-transform
  4. Unit 4: IIR Filter Design

    7 hours

    Analog filter design for digital filters; IIR design by impulse invariance and the bilinear transformation; Butterworth and Chebyshev filters; direct, cascade and parallel realisations; low-pass, high-pass, band-pass and band-stop designs by spectral transformation.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • IIR design by impulse invariance
    • Bilinear transformation and frequency warping
    • Butterworth filter design
    • Chebyshev filter design
    • IIR filter realisation structures
    • Frequency transformations for high-pass, band-pass and band-stop filters
  5. Unit 5: FIR Filter Design and Introduction to Multirate DSP

    7 hours

    Ideal filters and the Gibbs phenomenon; window functions compared; linear-phase FIR design by windows and frequency sampling; direct, cascade and lattice realisations; up-samplers, down-samplers, two-channel filter banks and multirate applications.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Linear phase FIR filters
    • FIR design using windows
    • FIR design by frequency sampling
    • FIR filter realisation structures
    • Lattice structure for FIR filters
    • Interpolation and decimation
    • Multirate DSP applications

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).