DBATU · Third Year B.Tech Electronics & Telecommunication Engineering · NEP 2020
Control System
26AF1372PE508B · Elective I · Semester V · 3 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60
One of the Elective I options.
Unit 1: Introduction to the Control Problem
Industrial control examples; mathematical models of physical systems; control hardware; transfer functions of LTI systems; open- and closed-loop systems and the benefits of feedback; block diagram reduction; signal flow graphs.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Mathematical models of physical systems
- Open-loop and closed-loop control systems
- Transfer function, poles and zeros, order and type
- Block diagram reduction
- Signal flow graphs and Mason's gain formula
Unit 2: Time Response and Stability Analysis
Standard test signals; time response of first- and second-order systems; initial and final value theorems; design specifications; stability and the Routh–Hurwitz criterion; relative stability; root locus construction and dominant poles.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Response of first-order systems
- Second-order systems and time-domain specifications
- Steady-state error and static error constants
- Routh–Hurwitz stability criterion
- Root locus: rules and construction
Unit 3: Frequency-response Analysis
Relation between time and frequency response; polar and Bode plots; the Nyquist stability criterion; gain and phase margins; closed-loop frequency response.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- Frequency response and frequency-domain specifications
- Polar plot
- Bode plot
- Nyquist stability criterion
- Gain margin and phase margin
- Closed-loop frequency response
Unit 4: Introduction to Controller Design
Stability, steady-state and transient accuracy, disturbance rejection, insensitivity and robustness; P, I and D control; lag and lead compensators by root locus and Bode plot.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- P, PI, PD and PID controllers
- Lag and lead compensator design
Unit 5: State Variable Analysis
State variables and state-space models; diagonalising the state matrix; solving state equations; eigenvalues and stability; controllability and observability; pole placement by state feedback; discrete-time state-space models and their stability.
Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then
- State-space representation
- Diagonalisation of the state matrix
- State transition matrix
- Controllability and observability
- Pole placement by state feedback
- State-space models of discrete-time systems
Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).