DBATU TY Electrical syllabus

DBATU · Third Year B.Tech Electrical Engineering · NEP 2020

Microprocessor and Microcontroller

26AF1293PE504E · Elective I · Semester V · 2 credits · Continuous assessment 20 + mid-semester 20 + end-semester 60

One of the Elective I options. Program Elective I courses carry 2 credits. The syllabus prints the 8085, 8051, 8255 and 8237 as 6065, 6051, 6255 and 6237.

All notes for this subject
  1. Unit 1: Architecture and Programming of the 8085 Microprocessor

    6 hours

    Functional block diagram, registers, ALU and buses; timing and control signals; machine cycles and timing diagrams; instruction formats, addressing modes and the instruction set; assembly language programs.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • 8085 architecture and functional block diagram
    • 8085 registers, ALU and buses
    • Machine cycles and timing diagrams
    • 8085 addressing modes
    • 8085 instruction set
    • 8085 assembly language programs
  2. Unit 2: Interfacing

    6 hours

    Memory interfacing: address space, buffering, timing and read/write cycles for SRAM, EPROM and DRAM; memory-mapped and I/O-mapped I/O; the 8255 PPI; programmed, DMA, synchronous, asynchronous and interrupt-driven transfer; keyboards and LED displays.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • Memory interfacing with the 8085
    • Memory-mapped and I/O-mapped I/O
    • 8255 programmable peripheral interface
    • Data transfer schemes
    • Keyboard and LED display interfacing
  3. Unit 3: Interrupts and DMA

    6 hours

    Need for and types of interrupts; interrupt structure and servicing; interrupt service subroutines; multiple interrupt requests; direct memory access and the 8237 DMA controller; applications of microprocessors.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • 8085 interrupt structure
    • Interrupt service routines
    • DMA and the 8237 DMA controller
  4. Unit 4: The Intel 8051 Microcontroller

    6 hours

    Architecture of the 8051; memory organisation; addressing modes; instruction set; Boolean processing; simple programs.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • 8051 architecture
    • 8051 memory organisation
    • 8051 addressing modes and instruction set
    • 8051 Boolean processing and simple programs
  5. Unit 5: 8051 Peripheral Functions

    6 hours

    Interrupt structure; timers and serial port; parallel ports and their modes; power control; interfacing and typical applications; the MCS-51 family.

    Examined in the 60-mark end-semester paper, and in the mid-semester exam if it is taught by then

    • 8051 interrupts
    • 8051 timers and counters
    • 8051 serial communication
    • 8051 ports and power control
    • 8051 interfacing and applications

Unit contents are summarised from the official DBATU syllabus . AiCanCode.org is not affiliated with Dr. Babasaheb Ambedkar Technological University (DBATU).